Pioneer CT-L77 작동 지침 - 페이지 36

{카테고리_이름} Pioneer CT-L77에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CT-L77 48 페이지. Stereo cd receiver; speaker system; stereo cassette deck

페이지 인쇄

7 Using the Tape Deck

With the MD stopped, the

display shows the number of

tracks and the playing time

The synchro indicator lights

and the recording indicator

flashes

After starting MD playback, the

recording indicator lights

steadily

Recording Other Sources

Cassette loaded and direction,

reverse mode and Dolby NR all

set up

Press MD to switch to the MD recorder.

Load the MD you want to record.

See page 11 of the MD manual for detailed instructions on loading discs.

If the disc has started playing, press &.

If you want to record just one track, select

the track using the $ and › buttons.

Press TAPE REC.

The tape deck goes into record-pause mode, waiting for you to start the MD

recorder.

Press MD to start the MD playing.

Recording starts automatically with the MD.

Once the track or disc has finished, the tape deck goes back into record-pause

mode—press & to fully stop recording.

Should you want to stop recording before the track/disc has finished playing,

simply press & any time during the recording.

Note: If the recorder has to switch the side of the tape half way through a track,

recording will start again on the other side from the beginning of the same track. This

means you don't get a single track spread over two sides of a tape.

Usually, when recording a CD or MD, the synchro-recording feature is the easiest way

to do it. However, if you want to record from the tuner or from a component connected

to the AUX/CD-R inputs, you'll need to start and stop the recording manually.

TAPE

AUX/CD-R

SOUND

STANDBY/ ON

AUX/CD-R

Follow steps 1–4 of Automatically

Recording a CD on page 34.

Load a cassette

Set the record direction

Set the reverse mode

Switch Dolby NR on/off.

TAPE REC

DISPLAY

SET

TAPE

TIMER/

! —

REC

CHARACTER

CANCEL

›

VOL

+ ⁄

TUNER