Pioneer VSX-534 매뉴얼 - 페이지 2

{카테고리_이름} Pioneer VSX-534에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-534 28 페이지. Switching the hdmi 4k signal format
Pioneer VSX-534에 대해서도 마찬가지입니다: 초기 설정 매뉴얼 (2 페이지)

페이지 인쇄

Switching the HDMI 4K Signal Format Input and Output by this Unit

When an AV component such as a TV or player that supports HDMI 4K is

connected to this unit, you can switch the 4K signal format that is input/output by

this unit.

Perform the following procedure when the unit is on.

1. While pressing SOUND RETRIVER on the main unit, press AUTO/DIRECT

to display the current setting on the display. While this is being displayed,

while pressing SOUND RETRIVER on the main unit, repeatedly press AUTO/

DIRECT to switch the setting.

Enhanced

Select when the AV component connected to this unit,

such as a TV or player, and the HDMI cable (*) supports

the high-definition 4K signal formats (4K 60p 4:4:4, 4:2:2

and 4K 60p 4:2:0 10 bit).

• There may be some image disruption depending on

the connected component and the HDMI cable. If this

occurs, switch to "Standard".

Standard

Select when the AV component connected to this unit,

such as a TV or player, supports the standard 4K signal

format (4K 60p 4:2:0 8 bit).

(*) When setting to "Enhanced", use Premium High Speed HDMI Cable or

Premium High Speed HDMI Cable with Ethernet that have the "PREMIUM

繁中

Certified Cable" label attached to the packaging.

2. To exit the settings, release your finger. After a few seconds, the display goes

out and the switching is complete.

Settings and the corresponding resolutions

4K (3840×2160p) 24/25/30 Hz

4K SMPTE (4096×2160p) 24/25/30 Hz

4K (3840×2160p) 50/60 Hz

4K SMPTE (4096×2160p) 50/60 Hz

Enhanced Standard

8 bit

RGB/

YCbCr4:4:4

10/12 bit

YCbCr4:2:2

12 bit

RGB/

8 bit

YCbCr4:4:4

YCbCr4:2:2

12 bit

8 bit

YCbCr4:2:0

10/12 bit