Pioneer VSX-604S 사용 설명서 - 페이지 30

{카테고리_이름} Pioneer VSX-604S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-604S 34 페이지.

REMOTE SET UP (GUI OPERATION)

re S C eye

canis!

Pioneer remote control commands are in the non-preset gray

buttons, but you can use them to learn remote control signals

from your component's remote control.

1. Perform the first three steps of "Calling up and setting

up presets".

2. Select the gray button you want to use for learning

and press.

The "STANDBY" indication flashes. (If you remain in

STANDBY for about 1 minutes, it is canceled.)

(Example: Using the 0 buttons for learning)

HITACHI

PANASONIC

AMICI

Point your component's remote control at this unit's

remote control unit's sensor window and press the

selected button. (Press, holding the remote control

unit within 50 cm of this unit's sensor window.)

¢ if "OK" is displayed, learning has been completed. If

you want to use another button for learning, repeat

steps 2 and 3.

¢ If "NG" is displayed, repeat steps 2 and 3.

« When you have completed learning, press the EXIT

button.

NOTE:

To return buttons you used for learning to their original settings,

press the CLEAR button. This returns them to the original Pioneer

remote control commands.

There are no signals in buttons

I, I, and If, so you can use

them for learning.

Even when OK is indicated during learning, operation may still not

be possible. If this happens, repeat the learning procedure. With

some makers' components, learning may be difficult to perform.

Learning may also not be possible if the remote control's batteries

are run down. If this is the case, load the remote control with new

batteries and repeat the learning procedure.

Even black preset buttons can be used for learning other

commands.

Learning a command may not be possible if many commands

requiring a large amount of memory have already been learned

resulting in insufficient memory remaining.