Pioneer VSX-D3S 작동 지침 - 페이지 18

{카테고리_이름} Pioneer VSX-D3S에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-D3S 40 페이지. Audio/video stereo receiver
Pioneer VSX-D3S에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지)

페이지 인쇄
Pioneer VSX-D3S 작동 지침

RECORDING WITH A CASSETTE DECK

RECORDING WITH TAPE 1

If the TAPE 2 MONITOR button is on, press to turn off.
1
TAPE 2 MONITOR
1. Select the source you want to record from with the input
selector buttons.
When recording AM or FM broadcasts, select a preset station
using the MULTI-JOG. If the desired station has not been
preset, tune in the station.
2. Start recording on TAPE 1 cassette deck.
3. Play the desired program source (record, compact disc, etc.).
The volume, balance and tone controls have no effect on the
recording.

RECORDING WITH TAPE 2

1. Select the source you want to record from with the input
selector buttons.
2. Start recording on the TAPE 2 cassette deck.
3. Play the desired program source (record, compact disc, etc.).
The volume, balance and tone controls have no effect on the
recording.
18
<
>
ARB7050

USING VCR 1, VCR 2 FOR AUDIO RECORDING

The audio signal output from the VCR 1 and VCR 2 AUDIO OUT
jacks is the same as that output from the TAPE 1 REC jacks, so
you can record using the same procedure as for recording with
TAPE 1.

COPYING TAPES

1
The following operations concern TAPE 1 to TAPE 2 copying.
1. Press the TAPE 1 input selector button.
2. Load the TAPE 1 cassette deck with a tape to playback.
3. Load the TAPE 2 cassette deck with a tape to record to.
4. Start recording on the TAPE 2 cassette deck.
5. Start playback on the TAPE 1 cassette deck.
The following operations concern TAPE 2 to TAPE 1 copying.
1. Select a source other than TAPE 1 with the input selector
buttons.
2. Press the TAPE 2 MONITOR button to turn it on.
3. Load the TAPE 2 cassette deck with a tape to playback.
4. Load the TAPE 1 cassette deck with a tape to record to.
5. Start recording on the TAPE 1 cassette deck.
6. Start playback on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped with
a monitoring function, the recorded sound can be monitored
through the speaker system by pressing the TAPE 2 MONITOR
button to ON.