Pioneer VSX-D3S 작동 지침 - 페이지 5

{카테고리_이름} Pioneer VSX-D3S에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-D3S 40 페이지. Audio/video stereo receiver
Pioneer VSX-D3S에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지)

페이지 인쇄

INSTALLATION PRECAUTIONS

INSTALLING THE RECEIVER

÷ Place the unit on a stable platform next to the television and

stereo system to be used with the unit.

÷ When using the unit with a stereo system, your speakers

should be placed away from your television (or TV monitor).

÷ Do not place heavy objects such as a television or TV monitor

on top of the unit.

÷ Do not place the unit on top of your TV set or TV monitor. Also,

keep the unit away from devices such as cassette decks which

are sensitive to magnetic fields.

If the cassette deck is installed in the A positions as shown in

the drawing below, it may be adversely affected during

playback. If possible, it is better to install it in the B position.

INSTALL THE RECEIVER IN A WELL-VENTILATED

PLACE AWAY FROM HEAT AND HUMIDITY

Do not install the unit in a location subject to direct sunlight, or

near a stove or radiator, etc. This could adversely affect the

cabinet and internal components. Also, avoid installing the unit

in a humid or dusty location. This could result in a malfunction

or accident. Do not install near a cooking stove where the unit

could be affected by smoke, steam, or heat. Avoid placing the

unit on surfaces such as shaggy carpets, beds and sofas which

may block ventilation under the unit and may cause damage.

÷ The rear panel vents are designed to disperse heat from the

unit. Be careful that curtains or other items do not block the

vents.

÷ To improve heat dispersion, set the unit so that it is at least

20 cm (8 inches) away from the wall.

At least 20 cm (8 inches)

Receiver

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by

tugging the cord and never touch the power cord when your

hands are wet as this could cause a short circuit or electric

shock. Do not place the unit, a piece of furniture, etc., on the

power cord, or pinch the cord. Never make a knot in the cord or

tie it with other cords. The power cords should be routed such

that they are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check the power

cord once in a while. When you find it damaged, ask your

nearest PIONEER authorized service center or your dealer for a

replacement.

SURROUND SPEAKER INSTALLATION EXAMPLE

To get the best effect out of the surround system, place the

speakers as shown below.

An example for center speaker location

When using dual center

speakers

LEFT

FRONT

CENTER SPEAKER

SPEAKER

Listening Area

LEFT

SURROUND

SPEAKER

NOTE:

÷ To avoid interference with the picture on a nearby TV set, use

magnetically shielded speaker systems. This is particularly

important for the center speaker since it is usually located

closest to the TV.

÷ Position the left and right channel speakers at equal distances

from the TV set and approximately 1.8 m (6 feet) from each

other.

÷ Position the center speaker above, below, or behind the TV set.

Sound may not appear to coincide with the picture if you

position it next to the TV set.

÷ Rear speakers are best positioned slightly above ear level.

You can set this unit to match the requirements and

specifications of your stereo system's speakers (whether or

not center speaker(s), rear speakers or a sub-woofer are

used, speaker size, etc.) to assure optimum sound quality.

Before using, perform settings in the SPEAKER MODE (refer

to page 29).

NOTE:

This unit does not feature conventional switching between

NORMAL / WIDE / PHANTOM center modes.

INSTALLATION

When using a single

center speaker

T V

RIGHT

FRONT

SPEAKER

FRONT

RIGHT

REAR

SURROUND

SPEAKER

ARB7050