Pioneer VSX-D510 사용 설명서 - 페이지 30
{카테고리_이름} Pioneer VSX-D510에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-D510 40 페이지. Audio/video multi-channel receiver
Pioneer VSX-D510에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지), 서비스 매뉴얼 (14 페이지)
Making a Recording
08
Making an Audio or a Video
Recording
The following steps show you how to make an audio or
a video recording from the built in tuner, or from an
audio or video source connected to the receiver (such as
a CD player or TV). Recordings can be made to a CD-
Recorder, cassette deck, MD, VCR, or DVR deck
connected to the CD-R/TAPE/MD, VCR or DVR in/out
connectors.
MEMO:
The receiver's volume, balance, tone (bass, treble,
loudness), and surround effects have no effect on the
recorded signal.
1
1 Turn the
MULTIJOG DIAL
press the
FUNCTION
control to select a source to record (you can
also use the
remote control to select a source).
All functions except MONITOR are accessible from
the remote control.
2 Prepare the program source.
Tune to the radio station, load the CD, etc. For a
video recording load the video, DVD etc.
30
En
SOURCE CLASS
MPX
BAND
CHANNEL
DISPLAY RF ATT
LOUDNESS FUNCTION MUTING
FL
REMOTE
MASTER
RECEIVER
DIMMER
SETUP
VOLUME
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
1
MONITOR
on the receiver or
button on the remote
buttons on the
MULTI CONTROL
3 Insert a blank tape, MD, video etc. into the
recording device connected to either CD-R/
TAPE/MD or VCR/DVR and set the recording
levels.
Refer to the instructions that came with the recorder
if you are unsure how to do this. Most video
recorders set the audio recording level
automatically—check your video's instruction
manual if you are unsure whether yours has manual
controls.
4 Start recording, then start playback of the
source component.
Record MONITOR
You can listen to (monitor) the recording as it's being
made using the
MONITOR
cassette deck would have to have a record monitor
function).
Press the
button to switch between the
MONITOR
recorded signal and the original source signal.
button on the front panel (a