3Com 3C905C-TX-M 빠른 매뉴얼 - 페이지 10

{카테고리_이름} 3Com 3C905C-TX-M에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 3C905C-TX-M 12 페이지. Etherlink pci network interface cards
3Com 3C905C-TX-M에 대해서도 마찬가지입니다: 빠른 매뉴얼 (12 페이지)

페이지 인쇄

ETHERLINK® PC] NETWORK INTERFACE CARDS QUICK GUIDE

Click Add.

The Select Network Adapter dialog box appears.

5 Click Have Disk.

The Insert Disk dialog box appears.

Insert the EtherCD in the CD-ROM drive.

Make sure that the letter name of your CD-ROM drive

(for example, d:\) appears in the entry box, and then

click OK.

The Select OEM Option dialog box appears.

8 Make sure that the 3Com EtherLink PCI NIC is

selected, and then click OK.

The Adapters tab of the Network screen appears.

9 Click Close.

If the Microsoft TCP/IP Properties screen appears,

enter the requested information for your network

environment. Refer to your system administrator or

the Windows NT documentation for assistance.

|f the Microsoft TCP/IP Properties screen does not

appear, the installation is complete.

Click Yes to restart the PC.

The network driver installation is complete. Go to the next

section, "Verifying Successful Installation," to confirm that

the NIC is properly installed.

Verifying Successful Installation

Follow the steps for your operating system.

Windows 95 and Windows 98

To verify successful NIC installation:

1 Open the Windows Start menu, select Settings, and

then select Control Panel.

Double-click the System icon, and then select the

Device Manager tab.

Double-click Network adapters and make sure that

the name of the 3Com EtherLink NIC appears.

If a red X or a yellow exclamation point (!) appears next

to the name of the NIC, the installation was not successful.

See the next section for troubleshooting help.