3Com 3C905C-TX-M 빠른 매뉴얼 - 페이지 5

{카테고리_이름} 3Com 3C905C-TX-M에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 3C905C-TX-M 12 페이지. Etherlink pci network interface cards
3Com 3C905C-TX-M에 대해서도 마찬가지입니다: 빠른 매뉴얼 (12 페이지)

페이지 인쇄

Installing the NIC in the PC

If you are planning to install the Remote Wake-Up cable

choose an empty PCI slot that is close to the matching

Remote Wake-Up connector on the PC motherboard.

Remote Wake-Up is supported by the following NICs:

3C905C-TX-M

3C905B-TX

3C905B-TX-M

3C905B-COMBO

3C905B-FX

3C900B-FL

If you have a 3C905C-TX-M NIC and your PC is compliant

with PCI 2.2, Remote Wake-Up is automatically enabled

through the PCI bus. The Remote Wake-Up cable is

not required.

Carefully insert the NIC in the PCI slot.

Figure 1 Installing the NIC

1 Remove slot cover

7 2 Insert NIC

PCI slots