Pioneer A-335 서비스 매뉴얼 - 페이지 45
{카테고리_이름} Pioneer A-335에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer A-335 46 페이지.
Pioneer A-335에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (37 페이지)
페이지 인쇄
[FRONT PANEL]
1) POWER switch/indicator
Press to turn power to the unit ON and OFF.
@ SPEAKERS A selector switch
Use this switch to listen to the speaker systems connected
to the SPEAKERS A terminals.
Depressed
position:
Sound
is heard
from
the speaker
systems.
OFF ( m):
Released
position: No sound
is heard from the speaker
systems.
Set
to
this
position
when
listening
with
headphones.
(3) SPEAKERS B selector switch
Use this switch to listen to the speaker systems connected
to the SPEAKERS B terminals.
ON
( sa.
d:
Depressed
position:
Sound
is heard
from
the
speaker
systems.
OFF ( m@ ):
Released
position:
No sound
is heard from the speaker
systems.
Set to this
position
when
listening
with
headphones.
@ REC SELECTOR switch
When this switch is set to a position other than SOURCE
or OFF, the equipment selected by the REC SELECTOR
switch can be recorded from, irrespective of the settings
of the INPUT SELECTOR and DIRECT switches.
TUNER:
To
record
from
the
equipment
connected
to
TUNER
terminals.
CD:
To record from the equipment connected to CD terminals.
OFF:
In this
position,
nothing
from
the
REC
terminals
of
DAT/TAPE 1 and TAPE 2 is output. Set to this position when
not recording; the tape deck will be disconnected, improving
sound quality.
SOURCE:
To
record from the equipment
selected
by the
INPUT
SELECTOR switch.
TAPE:
1% 2—
To
record
(copy)
from
the
tape
deck
of
DAT/TAPE 1 terminals, to the tape deck of TAPE
2 terminals.
2
1—
Torecord (copy) from the tape deck of TAPE 2
terminals,
to the tape deck
of DAT/TAPE
1
terminals.
40°
© INPUT SELECTOR switch
Use to select the playback source.
LINE:
For playback
with a component
connected
to the LINE
terminals.
TUNER:
For AM or FM broadcast reception with a tuner.
PHONO:
For record playback with a turntable.
CD:
For compact disc playback with a CD player.
DAT/TAPE
1:
For playback with a tape deck or digital audio tape deck
connected to the DAT/TAPE
1 terminals.
TAPE 2:
For playback with a tape deck connected to the TAPE 2
terminals.
6] VOLUME
control
Use to adjust the volume level.
NOTE:
This unit is equipped with a circuit that attenuates the LOUDNESS
and TONE effect as volume is turned up.
@ PHONO SELECTOR switch (Model A-443 only)
Set in accordance with the type of cartridge used with your
turntable.
MM
( @):
Set to this position when using a moving magnet cartridge,
or a moving coil cartridge with a high output of 1 mV or
more.
MC
( =
)
Set to this position when using a moving coil cartridge.
@© MUTING switch (Mode! A-443 only)
Use to temporarily cut sound volume.
ON ( m):
The sound is cut off.
OFF ( m@ ):
The sound will return to its previous volume.
© DIRECT switch/indicator
Use this switch/indicator when you do not wish to pass the
output from input terminal equipment through the various
frequency adjusting circuits (GSUBSONIC, BASS, TREBLE,
BALANCE,
LOUDNESS)
and adaptor terminals
(ADPT).
ON:
The indicator lights: The signals input through the input
terminals
are
reproduced
without
passing
through
the
various frequency adjusting circuits. This results in flat, pure
sound which is a more faithful reproduction of the input
source.