Pioneer A-607R 서비스 매뉴얼 - 페이지 22
{카테고리_이름} Pioneer A-607R에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer A-607R 29 페이지. Stereo amplifier
페이지 인쇄
- 1. Table of Contents
- 2. Safety Information
- 3. Exploded Views and Parts List
- 4. Schematic Diagram
- 5. Pcb Connection Diagram
- 6. Pcb Parts List
- 7. Adjustment
- 8. General Information
- 8. IC Information
- 8. Block Diagram
- 9. Specifications
- 9. Panel Facilities and Specifications
- 9. Front Panel
- 9. Remote Control Unit
A-607R
6. ADJUSTMENTS
6.1 IDLE CURRENT ADJUSTMENT
¶ CAUTION : Heatsinks' (Q323–Q326) DC level is equal to +B or -B.
Don't touch them or you will be electricary chocked.
1. Connect the measuring instrument as Fig.6-1. (R415 or R416)
2. Set the VOLUME CONTROL to minimum, BASS TONE CONTROL to center, TREBLE TONE CONTROL to center and BALANCE CONTROL
to center. Set VR301 and VR302 to minimum.
3. Set the POWER switch to ON.
4. Adjust VR301 (VR302) so that the voltage between both sides of R415 (R416) becomes 16mV±1mV. (Within 10 seconds from when the relay
is turned ON)
5. Ages for 7 minutes.
6. Adjust VR301 (VR302) so that the voltage between both sides of R415 (R416) becomes 11mV±1mV.
22
DC Voltmeter
DC Voltmeter
R415
R413
W150
W212
Heat Sink
VR301
R417
Heat Sink
Fig.6-1 Adjustment Method
AF ASSY
SIDE A
Heat Sink
R416
R414
VR302
Heat Sink
CN204