Pioneer A-676 사용 설명서 - 페이지 24

{카테고리_이름} Pioneer A-676에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer A-676 32 페이지. Stereo amplifier
Pioneer A-676에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

TROUBLESHOOTING

to carry out repair work.

No power supplied to unit.

No sound from one speaker.

Cannot record tapes.

Cannot perform tape copying.

<ARE1

194>

* Power plug is disconnected from outlet.

e The component power plug has been plugged

into another component power outlet (e.g. timer,

etc.) but power to that unit is disconnected.

or connected incorrectly.

¢ Jacks, or connecting cords pin plugs are dirty.

¢ The INPUT SELECTOR switch or ADPT 1/

TAPE 3 button selected does not match the

component being played back.

¢ The SPEAKERS selector switch is set to ''OFF ''

¢ The PHONO EQ button ts '"'OFF"' position

(When listening to PHONO tn A-777).

Jacks (A-777 only).

¢ Volume control set to ''00'' position.

¢ Muting button ts on (indicator lit). (A-777 only)

® Connecting cords or speaker cords are

disconnected on that side.

¢ BALANCE control has been adjusted to one side.

incorrect.

¢ Insert plug securely into outlet.

e Turn on power to the other component.

® Clean jacks and plugs.

e Set switches correctly (PHONO, TUNER, CD,

LINE, DAT/TAPE

1, TAPE 2). Set the ADPT 1/

TAPE 3 to OFF

components.

¢ Set the switch to "A," 'BY' or "A + B."

e Set PHONO EQ button to ''ON" position.

¢ Insert the shorting bars properly.

® Increase volume level from ''00'' position.

¢ Turn off the muting button (indicator off).

¢ Adjust BALANCE control to center position.

¢ Set switch correctly

(See section ''RECORDING TAPES').

e Reconnect properly.

¢ Consult the operating instructions for the

cassette deck.

e Set switch correctly

(See section 'COPYING TAPES").

cassette decks.