Pioneer CT-F10 서비스 매뉴얼 - 페이지 26
{카테고리_이름} Pioneer CT-F10에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CT-F10 28 페이지. Stereo cassette deck
Pioneer CT-F10에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지), 추가 운영 지침 (21 페이지), 서비스 매뉴얼 (28 페이지)
페이지 인쇄
CT-F10
7.1.2 POWER ON SEQUENCE
Perform the mechanism initializa-
tion every time it power on.
(When the AC outlet is pulled out
while raising up the Head Base or
the gear comes off, perform the
initialization every time because the
normal movement can't be done.)
26
• STANDBY/ON key is pressed.
• Receive the system power on
information with the sytem bus.
Go to Power ON
No
Loader out ?
Yes
Loader In
200mS WAIT
Yes
Is MODE SW
OFF ?
No
SOL 50mS ON
(port Pin 2
=H )
MOTOR ON
(port Pin 3
= L )
150mS WAIT
Yes
:ERROR
Is it fifth
times ?
No
No
Is MODE SW
OFF ?
Yes
300mS WAIT
MOTOR OFF
(port Pin 3 )
END
Note : Pin No. shows the Pin No. of µ-COM PDC060A.
Loader mechanism. switch (port Pin 40 and Pin 41 )
Pin 40 = H , Pin 41 = L
IN
Pin 40 = L , Pin 41 = H
OUT
Loader mechanism is opened (port Pin 1 and Pin 47 )
Pin 1 = L , Pin 47 = H
IN
Pin 1 = H , Pin 47 = L
OUT
Loader mechanism. is stop
condition (port Pin 17 = L)
MOTOR ON
500mS WAIT
No
Is MODE SW
OFF ?
Yes
ERROR
No
Is it second
times ?
Yes
:Give up
Initialize end
Deck motor off
(port Pin 3 = L)