Pioneer DC-Z85 사용 설명서 - 페이지 13

{카테고리_이름} Pioneer DC-Z85에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DC-Z85 28 페이지. Stereo double cassette deck amplifier / fm/am digital synthesizer tuner / stereo turntable

페이지 인쇄

| HOW TO HANDLE CASSETTE TAPES

Bear in mind the following points before loading

cassette tapes.

Is the tape loose, or is some of the tape outside the cassette?

If some of the tape is projecting outside the cassette shell or if itis

loose, it may not feed between the capstan and pinch roller. This will

prevent the tape from being transported or damage the tape itself. In

cases like these, insert a pencil into the reel hole and take up the slack

(Fig. A). Some cassette tapes come with a plastic or thick paper stop-

per which prevents tape slack. Remove this stopper when loading

the tape and replace it after having used the cassette.

What are the accidental erasure prevention tabs for?

A cassette is provided with these tabs so that important recordings

will not be erased accidentally. When the tab (Fig. B) on the cassette

shellis broken out with the tip of a screwdriver, it will not be possible

to activate the recording function even by pressing the recording

(REC) button, so valuable recordings will not be erased in error.

To re-record on a cassette whose tabs have been broken out, simply

stick a piece of doubled adhesive tape over the tab areas, asshownin

Fig. C.

NOTE:

The accidental erasure prevention tabs are located at the top lefton

both sides A and B (1 and 2}, so that material on each side can be

prevented from being erased in error.

Tips on using cassette tapes

® Leader tape (which does not allow sound to be recorded over it) is

provided at the beginning of a cassette tape. Start recording after

allowing the tape to run for approx.

5 seconds so that the leader

tape clears the recording head

cassette in its case so that dust and dirt do not adhere to the tape

after use, and so that the tape is prevented from becoming slack.

Choose a jocation which is not exposed to the effects of magnet-

ism, dust, dirt and oil for storing the tapes.

e Because C-120 tapes are so thin, they easily jarn in the pinch roller

and capstan, and they are susceptible to other trouble such as ir-

regular winding. Try not to use them with this unit.

Use tapes of 90 minutes or less.

Fig.A

Fig.8

How to take up tape slack.

How to prevent already

recorded

tapes

from

being erased,

Fig. C

When you wantto record again on a cassette with broken erasure

prevention tabs, cover the tab sections with a double layer of cel-

lotape or other tape.

Erasure

prevention

tabs

With TYPE II (HIGH/CrQ2) tape, be sure not to cover the tape-

type detection holes. If they are covered, the auto tape selec-

tor function will not operate correctly.

"Be sure not to

cover the tape-

type detection

holes