Pioneer DC-Z85 사용 설명서 - 페이지 3

{카테고리_이름} Pioneer DC-Z85에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DC-Z85 28 페이지. Stereo double cassette deck amplifier / fm/am digital synthesizer tuner / stereo turntable

페이지 인쇄

CONNECTIONS

CD player

Tuner

Q Speaker cord

€

L—

10mm

3 s

Push away.

1 =

Cutter

2 =

Twist the strands.

4 a

Pull back.

Refer to page 2 for the connections diagram

@ Accessory FM antenna

Accessory AM loop antenna

FM/AM tuner (F-Z95)

Turntable (PL-Z85, etc.)

Tuner input/output cord

Surround speaker system

CD player flat cable

Cassette deck amplifier (DC-285)

Turntable power, supply cord

Speakers cord

Speaker system

Power. cord

CD player (Separately sold PD-265, PD-Z75T or PD-Z285M)

LD player or video cassette recorder (VCR)

To the AC wall socket

@ Audio cord (White)

@ Audio cord (Red)

SSS8SSG898O9808

| Plug the power cord into the household electrical outlet only after

| all the connections have been completed.

Proceed as follows with the set up and connections.

1. Place the cassette deck amplifier on top of the CD player.

2. Connect the CD player OUTPUT jacks to the cassette deck

amplifier CD INPUT jacks with audio cords.

If using this unit together with the optional CD player PD-Z65, PD-

2757 ot PD-Z85M, connect the flat cable @.

3. Place the tuner on top of the cassette deck amplifier.

4, Connect the tuner input/output cord D to cassette deck am-

plifier,

TUNER AND CD PLAYER CONNECTIONS (Fig. [2))

»ctor until it locks, thus ensuring that it is con-

disconnecting the connector, pull itin the opposite

direction while pressing the left and right claws.

NOTE:

When connecting

or disconnecting the input/output cable, da so only

after disconnecting the power plug from the walf socket.

5. Connect the FM antenna @ and the AM loop antenna © to the

tuner's antenna terminals.

6. Place the turntable on top of the tuner.

Connect the turntable power supply cord © and audio cords

If using the turntable PL-Z85, connect the turntable's audio cords

and power supply cord respectively to the cassette deck ampli-

fier's PHONO jacks and DC 12V OUTPUT jack.

If using a different turntable, connect its audio cord and ground

cord.

8. Use the "LD/VCR" jacks for connection to the audio output

jacks of an LD player or VCR.

NOTE:

* Insert the plugs securely into the jacks. Improper connection car

lead to sound distortion or mattunction.

® The white plug is for the left channel connection and the red plug for

the right channel connection.

9. Connect the speaker cords (2 to SPEAKERS terminals.

Fig. [3])

Connect the "+-" terminals on the cassette deck amplifier to the

"+" terminals on the speakers, the "—" terminals on the c .

deck amplifier to the "—" terminals on the speakers

NOTE:

Do not allow the conductors of the cords to project out of the termi

nats or to come into contact with other conductors. Attreakdown or

failure may occur when conductors touch,

anes

Speaker impedance

Connect speaker systems with a nominal impedance ranging trom6

to 16 Q.

Surround speaker connection

Connect the plugs properly.

Connect a speaker system having a

nominal impedance of 16 Q or more.

10. Connect the CD player's power cord to the deck amplifier's

AC OUTLET.

11. Finally, connect the power cord @ to the AC wall socket.

<ARB1354