Pioneer GM-3400T 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Pioneer GM-3400T에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer GM-3400T 41 페이지. Bridgeable two-channel power amplifier
Pioneer GM-3400T에 대해서도 마찬가지입니다: 소유자 매뉴얼 (48 페이지), 소유자 매뉴얼 (17 페이지)

페이지 인쇄

Section

Connecting the units

1 Speaker (Left)

2 Speaker (Right)

One-channel output

1 Speaker (Mono)

Connections when using

the speaker input wire

Connect the car stereo speaker output wires

to the amplifier using the supplied speaker

input wire.

! Do not connect both the RCA input and the

speaker input at the same time.

1 Car Stereo

2 Speaker output

3 Gray: Right +

4 Gray/black: Right *

5 White/black: Left *

6 White: Left +

7 Speaker input connector

To speaker input terminal of this unit.

Connecting the power

terminal

! The use of a special red battery and ground

wire RD-223, available separately, is recom-

mended. Connect the battery wire directly

to the car battery positive terminal (+) and

the ground wire to the car body.

WARNING

If the battery wire is not securely fixed to the term-

inal using the terminal screws, there is a risk of

overheating, malfunction and injury, including

minor burns.

Route battery wire from engine com-

partment to the vehicle interior.

After completing all other amplifier connec-

tions, finally connect the battery wire terminal

of the amplifier to the positive (+) battery

terminal.

1 Positive (+) terminal

2 Engine compartment

3 Vehicle interior

4 Fuse (30 A) × 2

5 Insert the O-ring rubber grommet into the

vehicle body.

6 Drill a 14 mm hole into the vehicle body (1/2

inch) .