Pioneer GM-D1004 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Pioneer GM-D1004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer GM-D1004 45 페이지. Class d four-channel amplifier
Pioneer GM-D1004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지)

페이지 인쇄

1. Connecting the Units

Connecting the units

4 RCA cable (sold separately)

5 Car stereo with RCA output jacks

Connections when using

the speaker input wire

Connect the car stereo speaker output wires

to the amplifier using the supplied SP input

cord.

1 INPUT SELECT (input select) switch

2 SP input cord

To signal input terminal of this unit.

3 Speaker cord

— White/black: Front SP, Left *

— White: Front SP, Left +

— Gray/black: Front SP , Right *

— Gray: Front SP, Right +

— Green/black: Rear SP, Left *

— Green: Rear SP, Left +

— Violet/black: Rear SP, Right *

— Violet: Rear SP, Right +

4 Car Stereo or navigation system

Note

If speaker input wires from a head unit are con-

nected to this amplifier, the amplifier will automa-

tically turn on when the head unit is turned on.

When the head unit is turned off, the amplifier

turns off automatically. This function may not

work with some head units. In such cases, make

sure that the front L channel is connected cor-

rectly. If the function still does not work, please

use a system remote control wire.If multiple am-

plifiers are to be connected together synchro-

nously, connect the head unit and all amplifiers

via the system remote control wire.

Section