Pioneer GM-D7500M SERIES 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Pioneer GM-D7500M SERIES에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer GM-D7500M SERIES 15 페이지. Class d mono amplifier
Pioneer GM-D7500M SERIES에 대해서도 마찬가지입니다: 소유자 매뉴얼 (36 페이지), 서비스 매뉴얼 (31 페이지)

페이지 인쇄

Section

Connecting the units

! Install and route the separately sold battery

wire as far as possible from the speaker wires.

Install and route the separately sold battery

wire, ground wire, speaker wires and the am-

plifier as far away as possible from the anten-

na, antenna cable and tuner.

Connecting the speakers

Connect the speaker leads to suit the mode

according to the figures shown below.

One-channel output

1 Subwoofer

Connections when using

the speaker input wire

Connect the car stereo speaker output wires

to the amplifier using the supplied speaker

input wire with RCA pin cord.

1 Car Stereo

2 Speaker output

3 Red: Right +

4 Black: Right *

5 Black: Left *

6 White: Left +

7 Speaker input wire with RCA pin cord

To the RCA input jack of this unit

Note

! If speaker wires with an RCA pin cord from a

headunit are connected to this amplifier, the

amplifier will automatically turn on when the

headunit is turned on. When the headunit is

turned off, the amplifier turns off automati-

cally. This function may not work with some

headunits. In such cases, please use a sys-

tem remote control wire (sold separately). If

multiple amplifiers are to be connected to-

gether synchronously, connect the head unit

and all amplifiers via the system remote con-

trol wire.

! Connect the system remote control wire when

you wish to only turn on the car stereo, not the

amplifier.

! This amplifier automatically selects an input

signal mode between the RCA level and the

speaker level by detecting an input signal.