Pioneer GM-X562 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Pioneer GM-X562에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer GM-X562 17 페이지. Bridgeable power amplifier
Pioneer GM-X562에 대해서도 마찬가지입니다: 소유자 매뉴얼 (8 페이지), 소유자 매뉴얼 (6 페이지)

페이지 인쇄
Pioneer GM-X562 소유자 매뉴얼
Setting the Unit
Gain Control
If the sound level is too low, even when
the volume of the car stereo used along
with this power amplifier is turned up,
turn gain control on the front of the
power amplifier clockwise. If the sound
distorts when the volume is turned up,
turn the gain control counter-clockwise.
• When using with an RCA equipped car
stereo (standard output of 500 mV), set to
the NORMAL position. When using with
an RCA equipped Pioneer car stereo with
max. output of 4 V or more, adjust level to
match the car stereo output level.
• If you hear too much noise when using the
speaker input terminals, turn the gain
control counter-clockwise.
Power Indicator
The power indicator lights when the
power is switched on.
LPF (Low-Pass Filter) Select Switch
Set the LPF select switch as follows according to the type of speaker that is connected to the
speaker output connector and the car stereo system:
LPF Select
Audio frequency range
Switch
to be output
LPF (left)
Very Low Frequency range
OFF (right)
Full range
Speaker
Remarks
Type
Subwoofer
Connect a subwoofer.
Full range