Pioneer KEH-P5000 소유자 매뉴얼 - 페이지 21

{카테고리_이름} Pioneer KEH-P5000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer KEH-P5000 24 페이지. Multi-cd control fm/mw/lw tuner deck amplifier
Pioneer KEH-P5000에 대해서도 마찬가지입니다: 소유자 매뉴얼 (27 페이지), 소유자 매뉴얼 (48 페이지)

페이지 인쇄

Erasing the ITS Program

You can erase one or all selections of the

program for the disc being played by ITS.

To erase a single selection:

1.Start ITS play. (See page 20.)

2.Play the track you wish to erase by using

disc number search or track number

search.

3.Hold down button ® in bank [11] for

more than 2 seconds. ("CLEAR" appears

on the display [30] for about 3 seconds.)

To erase the disc program:

1.Start normal play.

2.Play the disc you wish to erase by using

disc number search.

3.Hold down button ® in bank [11] for

more than 2 seconds to erase the pro-

gram. ("CLEAR" appears on the display

[30] for about 3 seconds.)

Pausing

1.Press button @ in bank [11] to pause dur-

ing disc playback ("PAUSE" appears on

display [30)).

2.Press button @ in bank [11] again to re-

lease pause.

* You can select a track using the track

number search during pause. ("PAUSE"

is off while a track is being searched.)

When the track search ends, the found

track is paused at its betinning.

Disc Title Input

You can enter a title for the disc in the

multi-play CD player. The title stored for the

disc can be displayed.

The ADPS function* of the multi-play CD

player lets you enter titles for up to 100

discs. (Up to 100 discs, including ITS, can

be programmed (see page 20).)

*ADPS: Automatic Disc Program Selection

A disc title can consist of up 5 characters

for a single disc.

When the number of discs exceeds 100,

discs not being played (Information not

being renewed) in memory is overwritten

by the newest.

One title is stored for each disc. The title

stored for a disc is not erased after the

disc is changed.