Pioneer ODR PREMIER RS-A2 소유자 매뉴얼 - 페이지 20

{카테고리_이름} Pioneer ODR PREMIER RS-A2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer ODR PREMIER RS-A2 26 페이지. Digital “pure class a” integrated amplifier

페이지 인쇄

| Installation

AN CAUTION

To avoid accidents

+ Install the RS-A1/RS-A2 amplifier in the lug-

° install tapping screws in such a way that the

gage compartment.

screw tip does not touch any lead. This is

Do not install in:

important to prevent leads from being cut by

— Places where it could injure the driver or

vibration of the car, which can result in fire.

passengers if the vehicle stops suddenly.

+ To prevent electric shock, do not install the

~— Places where it may interfere with the dri-

amplifier to places where it might get in con-

ver, such as on the floor in front of the dri-

tact with liquids.

ver's seat.

+ To ensure proper installation, use the sup-

+ Make sure that leads are not caught in the

plied parts in the manner specified. If any

sliding mechanism of the seats, resulting in a

parts other than the supplied ones are used,

short-circuit.

they may damage internal parts of the ampli-

+ Confirm that no parts are behind the panel

fier, or they may become loose and the

when drilling a hole for installation of the

amplifier may come off.

amplifier. Protect all cables and important

equipment such as fuel pipes, brake pipes

and power supply harness from damage.

To prevent malfunction

+ To ensure proper heat dissipation of the

+ Do not install the amplifier on unstable

amplifier, take care of the following during

places such as the spare tire board.

installation.

— Allow adequate space on and around the

amplifier for proper ventilation.

Particularly, do not block the diffuser of

the cooling fan located on the top of the

amplifier.

— Do not cover the amplifier with a floor

mat or carpet.

€) Before installing and securing:

> Make temporary connections first and check that

> After installing the amplifier, confirm that the spare

the amplifier and the system operate properly. if

tire, jack and tools can be taken out smoothly.

the amplifier or the system does not operate, see

"Troubleshooting" {page 25) to check for incorrect

connections.