Pioneer Premier PRS-D1100M 소유자 매뉴얼 - 페이지 3

{카테고리_이름} Pioneer Premier PRS-D1100M에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Premier PRS-D1100M 49 페이지. Class d mono amplifier
Pioneer Premier PRS-D1100M에 대해서도 마찬가지입니다: 서비스 매뉴얼 (34 페이지)

페이지 인쇄

Visit our website

Visit us at the following site:

1 Register your product. We will keep the details of

your purchase on file to help you refer to this

information in the event of an insurance claim

such as loss or theft.

2 Receive updates on the latest products and tech-

nologies.

3 Download owner's manuals, order product cata-

logues, research new products, and much more.

About This Product

This product is a class D amplifier for the

subwoofer. If both L (left) and R (right)

channels are connected to the RCA input

of this product, output is mixed because

this product is a mono amplifier.

CAUTION

Never replace the fuse with one of greater

value or rating than the original fuse. Use of

an improper fuse could result in overheating

and smoke and could cause damage to the

product and injury including burns.

WARNING

• Handling the cord on this product or cords associat-

ed with accessories sold with the product will

expose you to lead, a chemical known to the State

of California and other governmental entities to

cause cancer and birth defects or other reproductive

harm. Wash hands after handling.

• Always use the special red battery and ground

wire [RD-223] and [RD-222], which are sold sep-

arately. Connect the battery wire directly to the

car battery positive terminal (+) and the ground

wire to the car body. There is the risk of a fuse

burning out if only one of these is connected.

• Do not touch the amplifier with wet hands.

Otherwise you may get an electric shock. Also, do

not touch the amplifier when it is wet.

• For traffic safety and to maintain safe driving

conditions, keep the volume low enough so that

you can still hear normal traffic sound.

• Check the connections of the power supply and

speakers if the fuse of the separately sold battery

wire or the amplifier fuse blows. Detect the cause

and solve the problem, then replace the fuse with

another one of the same size and rating.

• To prevent malfunction of the amplifier and speak-

ers, the protective circuit will cut the power supply

to the amplifier (sound will stop) when an abnor-

mal condition occurs. In such a case, switch the

power to the system OFF and check the

connection of the power supply and speakers.

Detect the cause and solve the problem.

• Contact the dealer if you cannot detect the cause.

• To prevent an electric shock or short-circuit

during connection and installation, be sure to

disconnect the negative (–) terminal of the battery

beforehand.

• Confirm that no parts are behind the panel when

drilling a hole for installation of the amplifier. Be

sure to protect all cables and important equipment

such as fuel lines, brake lines and the electrical

wiring from damage.

• DO NOT allow amplifier to come into contact with

liquids due to, for example, the location where the

amplifier is installed. Electrical shock could result.

Also, amplifier and speaker damage, smoke, and

overheating could result from contact with liquids.

In addition, the amplifier surface and the surface of

any attached speakers could become hot to the

touch and minor burns could result.