Pioneer PRS-D800 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Pioneer PRS-D800에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PRS-D800 15 페이지. Bridgeable two-channel power amplifier
Pioneer PRS-D800에 대해서도 마찬가지입니다: 소유자 매뉴얼 (41 페이지)

페이지 인쇄

Setting the unit

What's what

Right side

Front side

Back side

To adjust the switch, use a flathead screwdri-

ver if needed.

1 GAIN (gain) control

If output remains low, even when the car

stereo volume is turned up, turn controls to

lower level. If distortion occurs when the car

stereo volume is turned up, turn these con-

trols to higher level.

! For use with an RCA equipped car stereo

(standard output of 500 mV), set to the

NORMAL position. For use with an RCA

equipped Pioneer car stereo, with maxi-

mum output of 4 V or more, adjust level

to match that of the car stereo output.

! If you hear too much noise when using

the speaker input terminals, turn the

gain control to higher level.

2 Terminal cover

3 Power indicator

4 INPUT (input) switch

! If using only one input plug, set the gain

controls for speaker outputs A and B to

the same position.

Remove the cover before connecting the

amplifier. For details, refer to Before connect-

ing the amplifier on page 7.

The power indicator lights up to indicate

power ON.

Select 2CH for two-channel input and 1CH

for one–channel input.

Section