Pioneer SA-1060 사용 설명서 - 페이지 8

{카테고리_이름} Pioneer SA-1060에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer SA-1060 11 페이지.

페이지 인쇄

OPERATIONS

COPYING TAPES:

When two tape decks (or a double cassette deck) are used,

you can record the sounds from one deck onto the other.

Application examples:

To make a tape copy with contents identical to the original

tape.

To edit a recording of an FM broadcast in order to cut out

unwanted commercials, recording only desired material on-

to another tape.

[When using two tape decks]

(1) Load tapes for playback

(pre-recorded

tape)

and

recording

(non-recorded

tape)

into the

respective tape decks.

(2) Select the proper function switch.

To copy from the tape deck connected to TAPE 1 terminals

to the deck connected to the ADAPTOR/TAPE

2 terminals

aga. Press TAPE

To copy from the tape deck connected

to the ADAP-

TOR/TAPE 2 terminals to the deck connected to the TAPE

1 terminals ..... Set to any function other than TAPE 1, and

set the ADAPTOR/TAPE 2 switch to ON.

(3) Operate the tape decks to begin copying.

Set the tape deck with the original (playback) tape to the

playback mode, and set the tape deck with the non-

recorded tape to the recording mode.

Frvvgreecsey

ADAPTOR/TAPE2

switch

{When using a double cassette deck (an example

using the Pioneer Double Cassette Deck)]

(1)

(2)

(3)

Load tapes for playback (pre-recorded

tape)

and

recording

(non-recorded

tape)

into the

respective tape decks.

Select the [TAPE 1] FUNCTION switch or press

the ADAPTOR/TAPE 2 switch (for listening to

the sound during recording) on this unit.

When connected to the TAPE 1 terminals: — Press [TAPE

1].

When connected to the ADAPTOR/TAPE 2 terminals —

Set the ADAPTOR/TAPE 2 switch to [ON] position.

Operate the tape deck to begin copying.