Pioneer SA-9800 사용 설명서 - 페이지 6

{카테고리_이름} Pioneer SA-9800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer SA-9800 17 페이지.

페이지 인쇄

The amplifier is provided with two sets of SPEAK-

ERS

output

terminals.

Use the A set when

con-

necting only one set of speakers. Viewed from the

front, the R (right channel) SPEAKERS

terminals

are on the right and the L (left channel) SPEAK-

ERS

terminals are on the left. Connect the left

channel speaker to the L terminals and the right

channel speaker to the R terminals. The red L and

R SPEAKERS

terminals have a plus polarity and

the black terminals have a minus polarity and the

speaker systems have also the same dual polarities.

When connecting, always connect minus to minus

and plus to plus.

Cautions when connecting the speakers

1. The speaker

output terminals have polarities:

minus (black) and plus (red). The input jacks on

the speakers also have plus and minus polarities.

When connecting, make sure that these polarities

are aligned: plus to plus and minus to minus. If

the left and

right speaker

polarities are mis-

aligned, the reproduced sound will not display a

natural stereo effect.

3. Never use the speakers with the speaker output

terminals

shorted

(minus

and plus jacks con-

nected) since this may damage the power transis-

tors in the amplifier.

Processing and connecting the speaker cords

(Fig. 2)

4, Remove

your fingertip from the button.

The

terminal

will snap

back into position and so

check that the cord is securely connected. You

may

not hear any sound

if the cords are not

connected properly.

SPEAKERS

terminals

Connect your second pair

of speaker system,