Pioneer SX-2600 사용 설명서 - 페이지 3

{카테고리_이름} Pioneer SX-2600에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer SX-2600 16 페이지. Stereo control amplifier
Pioneer SX-2600에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 회로도 (4 페이지)

페이지 인쇄

SWITCHES (model SX-1700 only)

LINE VOLTAGE SELECTOR SWITCH

Only multi-voltage

models

are provided with this switch.

U.S.,

Canadian, European, U.K., and Australian models sre not provided

with this switch.

Main voitages in Saudi Arabia are 127 V and 220 V only, Never use

this model with 110 V setting in Saudi Arabia.

;

The line voltage selector switch is on the rear panel, Before your model

is shipped from the factory, this switch is set to the power requirements

of the destination. Check that it is set properly before plugging the power

cord into the AC outlet. If the voltaae is not properly set or if you move

te an area where the voltage requirements differ, adjust the selector

switch as follows

1. Use a medium-size screwdriver.

2. Insert the screwdriver into the groove on the voltage selector, and

adjust so that the tip of the groove points to the voltage value of

your area.

—t

1 2204

240V

(}

mov

120-1270

Medium-size screwdriver

CHECKING ACCESSORY ITEMS

AM Loop Antenna

FM T-type Antenna

CHANNEL STEP SWITCH

(Multi-voltage model only)

[100kH2z/1 OkHz}position:

Set to this position for areas with an FM reception step of 100kHz, AM

VOkKHz.

[50kHz/9kHz]position:

Set to this position for areas with an FM reception step of 50kHz, AM

QkHz.

NOTE:

When unsure about the channel allocation and de-emphasis values for

your area, consult your dealer for correct information.

CHANNEL STEP

SOkHz-FM-100kHz

SkHz—

AM=— 10kHz

eee

amma!

North and South America

Other countries