Pioneer VSA-1000 사용 설명서 - 페이지 29

{카테고리_이름} Pioneer VSA-1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSA-1000 35 페이지. Av digital surround amplifier
Pioneer VSA-1000에 대해서도 마찬가지입니다: 사용 설명서 (35 페이지)

페이지 인쇄
Pioneer VSA-1000 사용 설명서
USE OF LEARNING FUNCTIONS
Questions and Answers about the Learning Function
Q: The remote control unit of my VCR has two REC (recording) keys.
They both have to be pressed at the same time to start recording.
What is the learning procedure in this case?
A:
Hold one of the keys on the programmable remote control depressed
(for example the VCR @ key) until the LEARN indicator lights up,
and then press the two
keys on the VCR
remote
control
simultaneously.
Q: The remote control unit of my VCR has a REC (recording) key and
a PLAY (playback) key and they both have to be pressed at the same
time to start recording. What is the learning procedure in this case?
A:
Hold one of the keys on the programmable remote control depressed
{for example the VCR @ key) until the LEARN indicator lights up,
and then press the REC and PLAY keys on the VCR remote control
simultaneously.
As described above, operations which require two keys to be pressed
at the same
time are programmed
by pressing the two
keys
simultaneously.
Operating other equipment by the programmable remote
cl
1.
2.
ontrol unit
Set the LEARN switch of the programmable remote control unit
to the USE position.
Set the TRANSMIT mode selector switch to the desired position
(AUDIO/VIDEO/AUX).
Returning to the Initial Settings
1. Set the LEARN selector switch to the LEARN position.
2. Remove the battery cover.
Cover
3. Press any of the keys available for programming. The LEARN
indicator will illuminate.
4. Use a ball-point pen or similar object to press the RESET key while
the LEARN indicator is flashing.
The indicator will flash a number of times.
Continue pressing until it
nae
:
'
2
goes off.
* Set to the VIDEO position for programming as described in the
example.
Press the key of the desired function.
* The TRANSMIT indicator lights up while the remote control unit
is sending codes.
NOTE:
:
* When operating programmed keys, always set the LEARN switch to
the USE position, Operation is not possible in the LEARN position.
* For functions which require two keys to be pressed at the same time
(recording etc.) or functions for which several codes are sent
simultaneously
(auto functions,
timer programming,
etc.) the
programming procedure is different and improper operation may
»
occur,
* The programmed functions for the AUDIO, VIDEO and AUX positions
are cleared, and the remote control unit is reset to the Pioneer uniform
remote control codes.
* Press the button gently; do not use excessive force.
29
<ARB1177>