Pioneer VSA-E03 사용 설명서 - 페이지 2

{카테고리_이름} Pioneer VSA-E03에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSA-E03 48 페이지. Audio/video multichannel amplifier

페이지 인쇄

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know

how to operate your model properly. After you have finished

reading the instructions, put them away in a safe place for future

reference.

In some countries or regions, the shape of the power plug and

power outlet may sometimes differ from that shown in the

explanatory drawings. However the method of connecting and

operating the unit is the same.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This product complies with the Low Voltage Directive

(73/23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and

CE Marking Directive (93/68/EEC).

THE POWER SWITCH IS SECONDARY CONNECTED AND

THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS

POWER IN THE STANDBY POSITION.

IMPORTANT

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

Power cord CAUTION!

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power cord

when your hands are wet as this could cause a short

circuit or electric shock. Do not place the unit, a piece of

furniture, etc., on the power cord, or pinch the cord.

Never make a knot in the cord or tie it with other cords.

The power cords should be routed such that they are not

likely to be stepped on. A damaged power cord can

cause a fire or give you an electrical shock. Check the

power cord once in a while. When you find it damaged,

ask your nearest PIONEER authorized service center or

your dealer for a replacement.

IMPORTANT

FOR USE IN THE UNITED

KINGDOM

The wires in this mains lead are coloured in

accordance with the following code :

Blue

:Neutral

Brown

:live

If the plug provided is unsuitable for your socket

outlets, the plug must be cut off and a suitable plug

fitted.

VENTILATION

÷ When installing this unit, make sure to leave space

around the unit for ventilation to improve heat

radiation (at least 60 cm at top, 10 cm at rear, and 30

cm at each side). If not enough space is provided

between the unit and walls or other equipment, heat

will build up inside, interfering with performance or

causing malfunctions.

÷ Do not place on a thick carpet, bed, sofa or fabric

having a thick pile. Do not cover with fabric or other

covering.

Anything that blocks ventilation will cause internal

temperature to rise, which may lead to breakdown or

fire hazard.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-SER-

VICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Maintenance of External Surfaces

• Use a polishing cloth or dry cloth to wipe off dust

• When the surfaces are dirty, wipe with a soft cloth

• Never use thinners, benzine, insecticide sprays or

The cut-off plug should be disposed of and must not be

inserted into any 13 amp socket as this can result in electric

shock. The plug or adaptor or the distribution panel should

be provided with 5 amp fuse. As the colours of the wires in

the mains lead of this appliance may not correspond with

coloured markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to

the terminal which is marked with the letter L or coloured

red.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

and dirt.

dipped in some neutral cleanser diluted five or six

times with water, and wrung out well, and then wipe

again with a dry cloth. Do not use furniture wax or

cleaners.

other chemicals on or near this unit, since these will

corrode the surfaces.

Do not connect either wire to the earth terminal of a

three pin plug.

NOTE

After replacing or changing a fuse, the fuse cover in the

plug must be replaced with a fuse cover which corre-

sponds to the colour of the insert in the base of the plug

or the word that is embossed on the base of the plug,

and the appliance must not be used without a fuse cover.

If lost, replacement fuse covers can be obtained from

your dealer.

Only 5 A fuses approved by B.S.I. or A.S.T.A. to B.S.

1362 should be used.