Pioneer CDJ-500II 사용 설명서 - 페이지 11

{카테고리_이름} Pioneer CDJ-500II에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CDJ-500II 16 페이지. Compact disc player
Pioneer CDJ-500II에 대해서도 마찬가지입니다: 서비스 매뉴얼 (6 페이지)

페이지 인쇄

To search for a particular frame

[Using the Jog dial]

Press PLAY/PAUSE during playback, and rotate the

Jog dial in pause mode.

÷ Rotating the jog dial clockwise initiates search in

the forward direction and rotating it counterclock-

wise initiates search in the reverse direction.

÷ One rotation of the jog dial searches by 75 frames.

÷ The audio of normal playback can be heard when

the jog dial is rotated at a speed between 0.8 and

1.2 revolutions per second (rps).

[Using the SEARCH buttons ( 1, ¡ )]

Press the SEARCH buttons ( 1 or ¡ ) in pause

mode moves in the specified direction by one frame

per press.

To search for a particular passage

[Using the SEARCH buttons ( 1, ¡ )]

While ¡ is kept pressed, playback rapidly advances

toward the end of the disc. While 1 is kept pressed,

playback rapidly reverses toward the beginning of the

disc.

[Using the Jog dial]

If the Jog dial is rotated more than 2 rps in playback

mode, playback advances or reverses with the sound.

APPLICATION OPERATION

The setting of the cue point

If the cue point is memorized in the player, the player

enters playback standby mode at the cue point by

pressing the CUE button.

1 During playback, search for the cue point while

listening to the playback sound by pressing the

SEARCH buttons ( 1, ¡ ) or while watching

the PLAYING ADDRESS display in the display

window.

Press PLAY/PAUSE so that the player enters

pause mode.

2 Rotate the Jog dial slowly to search for the

desired point precisely.

÷ To set the cue point while listening to the

playback sound, release the Jog dial when the

desired sound is heard and return to the point

just before the desired point. (The point just

behind where the Jog dial was released is set as

the cue point.)

Switching ON/OFF of the Auto Cue

function

When the TIME MODE/AUTO CUE button is kept

pressed for more than 1 second, the Auto Cue function

is set to ON or OFF.

When the Auto Cue function is set to ON, the AUTO

CUE indicator in the display window lights up.

Playback operation using the auto cue

function

1 Press the EJECT button.

2 Load a disc.

÷ Place a disc correctly centered in the disc

compartment with the label side up. With a 3-

inch (8 cm) disc, place the disc in the groove of

the 3-inch (8 cm) disc guide correctly.

÷ Do not place more than one disc in the disc

compartment.

3 Push the door in to close.

4 Press the PLAY/PAUSE button.

÷ Press the PLAY/PAUSE button after the CUE

indicator lights.

7 When the selection is finished playing, the player

searches for the beginning of the next selection to

be played. The CUE indicator lights up and the 6

indicator blinks, and the player enters playback

standby mode.

The next selection is played immediately by pressing

the PLAY/PAUSE button.

3 Press the CUE button when the frame number

or playback has reached the desired point.

÷ Cue point memory is completed when the play-

back is muted and the CUE indicator lights up.

÷ The last stored cue point is cleared when a new

cue point is memorized.

÷ To set the cue point

Press the CUE button

in pause mode.

memorizes in

the player

BASIC OPERATION

playback direction