Pioneer CDJ-800MK2 사용 설명서 - 페이지 11

{카테고리_이름} Pioneer CDJ-800MK2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CDJ-800MK2 24 페이지. Compact disc player
Pioneer CDJ-800MK2에 대해서도 마찬가지입니다: 서비스 매뉴얼 (4 페이지)

페이지 인쇄

28. TRACK SEARCH buttons (4, ¢) P. 15

29. Reverse button / indicator (REV) P. 19

When this button is pressed, its indicator lights and the unit is set to

reverse play.

30. AUTO BEAT LOOP buttons / indicators (1, 2, 4, 8) P. 19

(1/8, 1/4, 1/2, 1/1) P. 18

When this button is pressed, auto loop play is performed based on

the track's BPM (1 beat, 2 beats, 4 beats or 8 beats).

When a loop has been set manually, the button operates as a loop

shortening button. (1=1/8, 2=1/4, 4=1/2, 8=1/1).

Rear Panel

31. AC inlet (AC IN)

Use the accessory power cord to connect this inlet to a standard AC

power outlet.

32. POWER — OFF/_ ON switch

33. CONTROL connector

When the accessory control cord is used to connect this connector

to the corresponding CONTROL connector on a Pioneer DJ mixer,

the DJ mixer can be used to control the CD player for fader start play

and back cue.

Also, by connecting this connector to the CONTROL connector on

another Pioneer DJ CD player, automatic relay play can be performed.

P. 20

34. DATA IN/OUT connector

When a commercially available miniplug cord (or the accessory con-

trol cord) is used to connect this jack to the same jack on another

CDJ-800MK2, recorded data such as cue points and loop points can

be copied from one player to the other.

Before Operating (Names and Functions of Parts)

35. AUDIO OUT L, R connectors

RCA-type analog audio output jacks.

36. DIGITAL OUT connector

RCA type coaxial digital output connectors used to connect a DJ

mixer or AV amplifier, CD player, etc., equipped with digital input

connectors. The digital outputs here support all DJ and other func-

tions, but only audio data is output (without subcodes; CD graphics

are not supported).

Names and Functions of Parts