Pioneer CDJ-850 사용 설명서 - 페이지 15

{카테고리_이름} Pioneer CDJ-850에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CDJ-850 32 페이지. Cdj-850 owner's manual (french)
Pioneer CDJ-850에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (3 페이지), (영어) 사용 설명서 (32 페이지)

페이지 인쇄

Main unit display

1 Playing address display

The track is displayed as a bar graph.

Turns off from the left side when the remaining time is displayed. The

entire graph flashes slowly when the remaining track time is under 30

seconds, then flashes quickly when the remaining track time is under

15 seconds.

2 CUE

The positions of currently set cue and loop points are displayed as

marks.

3 MEMORY

Cue and loop points recorded on USB devices are displayed as

marks.

4 INFO (page 19)

This lights when the [INFO] screen is displayed.

5 TAG LIST (page 18)

This lights when the [TAG LIST] screen is displayed.

6 BROWSE (page 17)

This lights when the [BROWSE] screen is displayed.

7 Information display section

The characters that can be displayed are letters A to Z, numbers 0 to

9 and certain symbols. "?" is displayed for other characters.

Jog dial display section

1 Operation display

This indicates the playing position, with one revolution equal to 135

frames. It turns during playback and stops in the pause mode.

2 Cue point display

8 9

8 Track number

This displays the track number.

It is not possible to display more than 100 tracks.

9 REMAIN

This lights when the time display is set to the remaining time.

a A. CUE (page 21)

This lights when auto cue is set.

b M, S, F (time display)

"M" indicates minutes, "S" seconds, "F" frames.

There are 75 frames to a second.

c % (playing speed display)

This indicates the percentage by which the playing speed is changed.

d BPM

Displays BPM (Beats Per Minute) of the track currently being played.

e MT

This lights when the master tempo is set.

f WIDE, ±16, ±10, ±6

This indicates the range by which the playing speed can be adjusted.

3 Audio memory status display

This flashes when the audio memory is being written. It stops flash-

ing, remaining lit, when writing is completed.

It may not be possible to perform the real time cue operation while

the audio memory is being written.

The display also flashes when there is not enough memory due to

scratch play.

4 Jog touch detection display

When the jog mode is set to VINYL, the top of the jog dial lights when

pressed.

5 VINYL

This lights when the jog mode is set to VINYL.