Dinamica Generale DG500 빠른 사용 설명서 - 페이지 3
{카테고리_이름} Dinamica Generale DG500에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dinamica Generale DG500 12 페이지. Feeding monitoring
페이지 인쇄
Use
SECTION 1 ‐ Settings
1) From the "TOTAL WEIGHT" mode press
and choose PARAMETERS
2) Move through the list using ↓↑ and press
ENTER to select the parameter to modify.
a. Modify each parameter with "
‐
"
" keys.
b. Press ENTER to confirm.
c. Press
d. Press
3) Select CONTRAST from the list using ↓↑ and
press ENTER.
4) Modify the contrast using ↓↑ and press
ENTER to confirm.
Setting the unit of measure
1) Enter into the Password configuration menu
pushing the
key when the device is
switched on: the message "Config." will
appear.
2) Select the number 454 con the ↓↑ keys and
confirm with ENTER key.
3) Selection the unit of measure in kg or pounds
with the ↓↑ keys.
4) 0=Kg, 1=Lb
5) Push ENTER key in order to confirm the value
of the parameter.
Dinamica generale S.p.A.
+
" and
to save changes
to undo the last change
1)
3)
1)
2)
2)
4)
3)
1
Rev A1