Pioneer CLD-M401 사용 설명서 - 페이지 4

{카테고리_이름} Pioneer CLD-M401에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CLD-M401 40 페이지. Multi-play cd cdv/ld player
Pioneer CLD-M401에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지), 사용 설명서 (40 페이지)

페이지 인쇄

1. Features and Functions

PRECAUTIONS

If it becomes necessary to transport or ship this unit

in the future, be sure to first remove

the disc (if

loaded), and retract the disc table to its closed position.

Then the power off, and, after the "OFF" indicator

stops blinking on. the display, disconnect the power

cord.

INSTALLING THE PLAYER

@ Place the player on a stable platform next to the television

and stereo system to be used with the player.

@ When

using the player with a stereo system,

your

speakers should be placed away from your television (or

TV monitor).

@ Do not place heavy objects such as a television or TV

monitor on top of the player.

@ Do not place the player on top of your TV set or TV

monitor. Also, keep the player away from devices such

as cassette decks which are sensitive to magnetic fields.

When FM or AM stations are being received, signal noise

may be generated if the player is turned on. Turn off the

player when not in use. Also, if there is signal noise when

receiving radio stations with an indoor antenna, adjust the

position or direction of the antenna.

INSTALL

THE PLAYER

IN A WELL-VENTILATED

PLACE AWAY FROM HEAT

AND HUMIDITY

Do not install the player in a location subject to direct

sunlight, or near a stove or radiator etc. This could adversely

affect the cabinet

and internal components. Also avoid

installing the player in a humid or dusty location. This could

result in a malfunction or accident. Do not install near a

cookstove where the player could be affected by smoke,

steam, or heat.

AVOID SOURCES OF HEAT

Do not put the player on sources of heat, such as an

amplifier. When installing with audio components on a rack,

avoid components that generate heat, by placing the player

below such components where there is adequate ventilation

and not much dust. Avoid placing the player on surfaces

such as shaggy carpets, beds, and sofas which may block

ventilation under the player and cause damage.

CAUTIONS FOR AUTOMATIC LOADING

OPERATIONS

Since this player has an automatic loading construction,

use the button on the player or the remote control

unit for opening and closing of the disc table. To avoid

damage,

be careful not to apply any force to the

Moving disc table.

STRIPE

PATTERNS

APPEARING

PROGRAM

Stripe patterns may appear during a TV program if the player

unit is turned on,

depending on the quality of reception of

the TV station. This is neither a malfunction of the television

nor the player. If stripes appear while watching the TV, or

when watching the TV for long periods of time, turn the

player off.

CONDENSATION

Moisture will form in the operating section of the player

if the player is brought from cool surroundings into a

warm

room

or if the temperature of the room

rises

suddenly. When this happens, player's performance will

be impaired.

To prevent this, let the player stand

in its new

surroundings for about an hour before switching it on,

or make sure that the room temperature rises gradually.

The same symptoms of condensation may be caused during

summer, if the player is exposed to the breeze fram an air

conditioner. In such cases change the location of the player.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug

by tugging the cord and never touch the power cord when

your hands are wet as this could cause a short circuit or

electric shock. Do not place the unit, a piece of furniture,

etc., on the power cord, or pinch the cord, Never make a

knot in the cord or tie it with other cords. The power cords

should be routed in such a way that they are not likely to

be stepped on. A damaged power cord can cause fire or

give you an electrical shock. Check the power cord regularly.

When

you find it damaged,

ask your nearest

PIONEER

authorized service center or your dealer for a replacernent.

CLEANING CARE

Use a soft, dry cloth for cleaning. For stubborn dirt, soak

the cloth in a weak detergent solution; wring well first and

wipe. Use a dry cloth to wipe it dry. Do not use any

volatile agents such as benzine or paint thinner, as they

may damage the surface of the player.

Abnormal functioning of this unit may be caused by

lightning, static electricity, or other external inter-

ference. To restore normal operation, turn the power

off and then on again, or unplug the AC power cord

and then plug it in again.