Pioneer DEH-6400BT 운영 매뉴얼 - 페이지 21

{카테고리_이름} Pioneer DEH-6400BT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-6400BT 36 페이지. Cd rds receiver
Pioneer DEH-6400BT에 대해서도 마찬가지입니다: 소유자 매뉴얼 (25 페이지), 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

Operating this unit

This setting allows you to switch your source to USB/

iPod automatically.

1 Press M.C. to turn the plug and play function on

or off.

! ON – When USB storage device/iPod is con-

nected, the source is automatically switched

to USB/iPod. If you disconnect your USB sto-

rage device/iPod, this unit's source is turned

off.

! OFF – When USB storage device/iPod is con-

nected, the source does not switch to USB/

iPod automatically. Please manually change

the source to USB/iPod.

Warning tone (warning tone setting)

If the front panel is not detached from the head unit

within four seconds of turning off the ignition, a warn-

ing tone sounds. You can turn off the warning tone.

1 Press M.C. to turn the warning tone on or off.

AUX (auxiliary input)

Activate this setting when using an auxiliary device

connected to this unit.

1 Press M.C. to turn auxiliary setting on or off.

Dimmer (dimmer setting)

To prevent the display from being too bright at night,

the display is automatically dimmed when the car's

headlights are turned on. You can turn the dimmer on

or off.

1 Press M.C. to turn dimmer on or off.

Contrast (display contrast setting)

1 Turn M.C. to adjust the contrast level.

0 to 15 is displayed as the level is increased or de-

creased.

S/W control (rear output and subwoofer setting)

This unit's rear output (rear speaker leads output and

RCA rear output) can be used for full-range speaker

(Rear SP :F.Range) or subwoofer (Rear SP :S/W) con-

nection. If you switch the rear output setting to Rear

SP :S/W, you can connect a rear speaker lead directly

to a subwoofer without using an auxiliary amp.

1 Press M.C. to switch the rear output setting.

! When no subwoofer is connected to the rear

output, select Rear SP :F.Range (full-range

speaker).

! When a subwoofer is connected to the rear

output, select Rear SP :S/W (subwoofer).

! Even if you change this setting, there will be no

output unless you turn the subwoofer output on

(refer to Subwoofer1 (subwoofer on/off setting)

on page 15).

! If you change this setting, subwoofer output in

the audio menu will return to the factory settings.

! Both rear speaker lead outputs and RCA rear out-

put are switched simultaneously in this setting.

Demonstration (demo display setting)

1 Press M.C. to turn the demo display on or off.

Ever-scroll (scroll mode setting)

When ever scroll is set to ON, recorded text informa-

tion scrolls continuously in the display. Set to OFF if

you prefer the information to scroll just once.

1 Press M.C. to turn the ever scroll on or off.

BT AUDIO (Bluetooth audio activation)

You need to activate the BT Audio source in order to

use a Bluetooth audio player.

1 Press M.C. to turn the BT Audio source on or off.

Clear memory (resetting the Bluetooth wireless tech-

nology module)

Section