Ariston AWD 129 설치 및 사용 설명서 지침 - 페이지 6

{카테고리_이름} Ariston AWD 129에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston AWD 129 21 페이지. Washer / washer-dryer combo
Ariston AWD 129에 대해서도 마찬가지입니다: 수리 매뉴얼 (20 페이지)

페이지 인쇄

Installation

When the new washer-dryer arrives

Whether new or just transported to a new house, installation is extremely important

for the correct functioning of your washer-dryer.

After removing the appliance from its packaging, check that it

is intact. The inside of the machine is supported, for

transportation, by four shipping bolts on the back panel.

Before using the washer-dryer,

remove the external shipping bolts,

remove the spacers together with the

rubber tubes attached to them (save

all the parts) and use the plastic

blanking plugs provided to fill in the

holes. Use the wrench provided to

remove the external bolts.

Attach the two rubber hoses provided to the red (hot) and

white (cold) water inlets on the back (top right) or the appliance.

Using the "U"-Connector provided, place the drain hose into

the drain pipe (or the sink.) See Plumbing on Page 7 for more

details.

Leveling

The washer-dryer must be levelled appropriately in order to

guarantee its correct functioning. To level the appliance, the front

feet must be adjusted; the angle of inclination, measured according

to the worktop, must not exceed 2°.

Excessive Weight Hazard

Use two or more people to move

and install your appliance.

Failure to do so can result in

back or other injury

The front feet are self-locking & adjustable

For your own protection, and to prevent accidents,

injury and fire, please read the following carefully:

1. Destroy the carton and plastic bags, after the washer-dryer

has been unpacked.

2. Children should never be left alone or unattended in the

area where appliances are located.

3. Washer installation and grounding must be done in

accordance with local codes by a qualified installer. Installation

instructions are packed in new washer to the installer's

reference.

4. ONLY Low Sudsing detergent is recommended for this

appliance.

Retain the shipping bolts, spacers and washers.

Should you move residence then these should be

replaced to support the inside of the machine to

prevent damage when transporting the machine.

Instructions for installation and use

WARNING

technician to prevent personal injury or damage to the machine.

7. Disconnect power to the washer at the circuit breaker or

fuse box, or unplug the machine in an emergency when

servicing is required. Have the installer show you and label the

proper switch or fuse at the electrical disconnect box.

WARNING

Electrical Shock Hazard (death, fire or electrical shock):

1) Plug into a grounded 3 prong outlet.

2) Do not remove ground prong.

3) Do not use an adapter or an extension cord.

4) The Appliance should be connected to an Individual

Branch Circuit with N. 14 AWG Wire and Protected by 15

A Fuse.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction,

or breakdown, grounding will reduce the risk of electric shock

by providing a path of least resistance for electric current. This

appliance is equipped with a cord having an equipment-

grounding conductor and grounding plug. The plug must be

plugged into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

WARNING - Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. Check a qualified

electrician if you are in doubt as to whether the appliance is

properly grounded.

Do not modify the plug provided with the appliance. If it will not

fit the outlet, have a proper outlet installed by a qualified

electrician.

Warning !

The company denies all liability if and when these

instructions are not respected. Plastic bags,

expanded styrofoam, nails and other packaging

parts are not children's toys, are potentially

dangerous and should be disposed off properly.

5. The washer must be

plugged into a properly

grounded 3-prong

electrical outlet. For

your safety, the third or

round grounding prong

must

never

removed.

DO NOT USE AN

EXTENSION CORD.

6. Repair or replace-

ment of a part should

be made only by a

qualified

Electrical Requirements

www.aristonappliances.us

service