Pioneer LaserDisc LaserKaraoke CLD-2730K 사용 설명서 - 페이지 9
{카테고리_이름} Pioneer LaserDisc LaserKaraoke CLD-2730K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer LaserDisc LaserKaraoke CLD-2730K 27 페이지. Cd cdv ld player
페이지 인쇄PLUG THE POWER CORDS INTO AN AC OUTLET
Plug the AC power cords of the player, stereo amplifier and TV set into an AC outlet.
When the power cord of this unit is connected to an AC outlet, power is supplied to the
unit's internal memory (such as the last memory) even when the POWER switch is off
(STANDBY).
Therefore, be sure to connect the power cord directly to a wall outlet.
If
the power cord is connected to an outlet such as a switched outlet on an amplifier, the
various memory
contents will be erased whenever the amplifier's power switch
is
turned off.
;
)
a
CONNECTING TV AND STEREO AMPLIFIER
® Connect the VIDEO OUT jack of the player to the video
input jack of the monitor television.
@ Connect the AUDIO OUT jacks to the stereo amplifier
AUX, CD, LD, VDP or other jacks, except the PHONO
input jacks. The television speakers can also be used
by connecting the television audio input jacks and the
player AUDIO OUT jacks. However, connection to a
stereo amplifier is recommended to obtain superior
audio
playback
quality for Compact
Discs and
LaserDiscs.
Do not change
the television antenna
and VCR
connections.
Ns
=.
if
mea
Re
ee
ge
THE fq] MARK
System control can be performed when the player is
combined with an optional AV amplifier, which can
provide centralized control of Pioneer products with the
mark.
Connect the VIDEO OUT jack of the player to the video
disc video input jack of the AV amplifier and connect
the AUDIO OUT jacks of the player to the audio input
jacks of the AV amplifier.
Connect the CONTROL
IN jack of the player to the
CONTROL
OUT jack of the AV amplifier using a
commercially available cord with mini-plugs.
® For details concerning the connection and operation
methods, please refer to the operating instructions for
the AV amplifier.
/)
te
ATTENUATOR SWITCH
*
When the television speakers are used, the sound may
be distorted. In this case, set the ATTENUATOR switch
(to ON to reduce the distortion.
a]
9
<VRB1118>
En