Pioneer PD-41 서비스 매뉴얼 - 페이지 22

{카테고리_이름} Pioneer PD-41에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PD-41 42 페이지.
Pioneer PD-41에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지)

PD-41,PD-3700

MAIN BOARD ASSEMBLY

Hee

(CN201)

7 ae

TEST MODE

g VR102 VR152

jumper wires

VR1

VR151

test

move [==]

Figure 1 Adjustment Locations

6-4. Notes

1. Use a 10: 1 probe for the oscilloscope.

2. All the knob positions (settings) for the oscilloscope in the adjustment procedures are for when a 10:1 probe is

used.

6-5. Test

mode

These models have a test mode so that the adjustments and checks required for service can be carried out easily.

When these models are in test mode, the keys on the front panel work differently from normal. Adjustments and

checks can be carried out by operating these keys with the correct procedure. For these models, all adjustments are

carried out in test mode.

[Setting these models to test mode]

How to set this model into test mode.

1. Turn off the power switch.

2. Short the test mode jumper wires. (See Figure 1.)

3. Turn on the power switch.

When the test mode is set correctly, the display is different from what it usually is when the power is turned on. Ifthe

display is still the same as usual, test mode has not been set correctly, so repeat steps 1-3.