Pioneer PD-F507 사용 설명서 - 페이지 6
{카테고리_이름} Pioneer PD-F507에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PD-F507 17 페이지. File-type compact disc player
Pioneer PD-F507에 대해서도 마찬가지입니다: 사용 설명서 (30 페이지), 서비스 매뉴얼 (10 페이지), 서비스 매뉴얼 (10 페이지)
페이지 인쇄
CONNECTIONS
disconnect the power cord from the AC outlet.
anna: |
CONTROL
}
OUT
|
tereo amplifier
e000
Output cable
White
® Before making or changing the connections,switch off the power switch and
Control cable (PD-F407 and U.S., Canadian, Australian
and New Zeaiand models of PD-F507 only)
To the CONTROL
IN jack
~~» of the Pioneer component
©
bearing the BRP mark,
0 player
OPTICAL
DIGITAL IN
Power cord
| OH
This output terminal is
PD-F507 only.
® Making connections
Connect the OUTPUT jacks of this unit to the input jacks (CD or
AUX)
of the amplifier.
Make
sure that the white plug is
connected to the feft (L) jack and the red plug to the right (R)
jack.
e@ Be sure not to connect
this unit to the amoplifier's PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
[2 Connect the power cord to a household AC wall outlet.
e@ Make sure the plugs are inserted fully into the wall! outlet.
NOTE:
Do not connect the power cord to an AC outlet on your amplifier.
® Connecting the OPTICAL FIBER CABLE
(PD-F507 only)
This unit can be connected to an amplifier equipped with an optical
digital jack.
1. Remove the protective dust cap from this unit's DIGITAL OUT
OPTICAL jack.
2. Use an optical fiber cable to connect the DIGITAL OUT OPTICAL
jack of this unit to the optical input jack of the amplifier.
*
Align the plug of the optical fiber cable with the optical digital jack
and fully insert the plug to make a secure connection
Use a separately sold optical fiber cable for the optical digital jack
connections.
Precautions concerning use of optical fiber cables
*
Fully insert the optical fiber cable plugs al! the way into the jacks
©
Be careful not to foid or crimp the cable. When coiling an optical
fiber cable for storage, make sure the diameter of the coilis
15cm
(6 in.} or larger.
«
Use an optical fiber cable with a length of 3 m (10 ft.) or jess.
«
Protect the optical fiber cable plugs from scratches and dust.
*
When the unitis not connected using an optical fiber cable, be sure
to keep the protective dust cap plugged into the optical digital
output jack at all times.
6
<PR81265>
En
©System
remote control with a Pioneer stereo
amplifier that has the fq] mark (PD-F407 and U.S.,
Canadian, Australian and New Zealand models of
PD-F507 only)
When
a Pioneer stereo amplifier bearing the
mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL
OUT jack of the amplifier.
This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier.
If you do not plan to use this feature, it
is not necessary to connect the CONTROL IN/OUT jacks,
@
The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause, Track/Disc Search and Disc Change
operations.
e
For instructions regarding connections and operation, refer to
the operating instructions provided with your stereo amplifier.
NOTES:
e@
When a contro! cable is connected to the player's CONTROL
IN jack, direct control of the player with the remote control unit
is not possible.
Operate the player with the remote control unit
by aiming it at the amplifier.
e
Be sure to connect both of the control cable's plugs securely to
the CONTROL IN and CONTROL
OUT jacks. Do not connect
only one end of the cable.
e@
8e sure to turn off the power of the amplifier before connecting
the power cord and output cable.