Pioneer PDF904 사용 설명서 - 페이지 12

{카테고리_이름} Pioneer PDF904에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDF904 22 페이지. File-type compact disc player
Pioneer PDF904에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

BASIC OPERATION

Changing discs during playback

Selecting the playing mode

This unit lets you change up to 75 discs without interrupting playback,

but please be aware of the following points

Donot press the Rack EJECT (4) button in the following situations.

1, When one of the discs in that Rack is playing back.

2. If less than ten seconds

has elapsed since the end of disc

search or playback

You can determine

which Racks cannot be opened from the

following two displays.

1, PLAY INDICATOR*

While the PLAY INDICATOR is blinking: One of the Racks cannot

be opened even when its EJECT (4) button is pressed.

The blinking sequence of the PLAY INDICATOR indicator the Rack

number which cannot be opened.

Example: When Rack 2 cannot be opened

Lem

Led

Blinks

After a certain

Blinks twice

This cycle is

twice

interval'

again

repeated

a Display window

When the front panel is opened, the Rack number which cannot

be opened is displayed on the front display window. Example:

When Rack 2 cannot be opened "RACK 2" is displayed

if no Rack number is displayed (simply "RACK" is displayed), any

Rack can be opened.

NOTE

Donotpress the EJECT

(&) button of the Rack which cannot

be opened. if you press it by mistake, push the Rack back to

its original position.

Do not force a Rack which cannot be opened, otherwise a

matfunction will result.

This also functions as PLAY indicator and STANDBY indicator. In

the standby mode, this indicator lights up.

Press the MODE button on the front panel or remote control unit

in stop mode to select the desired mode,

Playback starts in

selected mode.

All of the discs loaded in the Racks of this unit

@ For the CUSTOM registration procedure, refer to page 14,

Each time the button is pressed, the playing mode changes circularly.

in stop mode

ALL ——

SINGLE

——=® CUSTOM |

is CUSTOM II) ———

CUSTOM II pai

ALL peel

SINGLE

@ When the SINGLE mode is selected during playback, the SINGLE

mode playback is carried out from the disc being played.

NOTES:

CUSTOM mode cannot be selected during playback.

When the power is turned on, playback starts with the last

selected mode.

if less than 100discs are loaded

in the playback mode, this unit does not recognize a disc when the

disc is not inserted into the Rack or the disc is placed with the label

surface facing the wrong way.

In this case, the display (below) will

appear for about 3 seconds in the front panel. Once this information

is stored in memory, the next disc will be played back in the ALL

mode, but no disc will be played back in the SINGLE made.