Pioneer PDR-509 사용 설명서 - 페이지 30

{카테고리_이름} Pioneer PDR-509에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDR-509 40 페이지. Compact disc recorder
Pioneer PDR-509에 대해서도 마찬가지입니다: 서비스 회로도 (23 페이지), 서비스 매뉴얼 (48 페이지), 서비스 매뉴얼 (23 페이지), 서비스 매뉴얼 (14 페이지)

페이지 인쇄
Pioneer PDR-509 사용 설명서
Additional Recording Features

Numbering Tracks

If you're recording from
source material. Although automatic track numbering is the default mode of the recorder, you can number tracks manually
as recording is taking place. In some cases— such as recording from digital satellite or Laserdisc, or from an analog
source — auto track numbering may not work reliably (in these cases, a new track is started after the recorder detects two
seconds of silence), and it's better to use manual track numbering. Remember: it is not possible to edit track numbers after
recording.
1
◊ÛB - .?/
INPUT
SELECTOR
Î
FADER
FINALIZE
DIGITAL
AUTO/
ERASE
SYNCHRO
MANUAL
7
8
3
1
¡
4
INPUT
SKIP
SELECTOR
PLAY
SET
1
2
3
5
6
7

Recording Fade Ins and Fade Outs

Sometimes, for example if you're recording just an excerpt from something, it may be better to fade in the recording, then
fade out again at the end, rather than start and end abruptly. Note that you can't record a fade in when in synchro recording
mode (although you can record a fade out).
Î
FADER
FINALIZE
REC
DIGITAL
AUTO/
TRACK NO.
ERASE
SYNCHRO
MANUAL
WRITE
7
8
3
TIME
1
¡
4
¢
INPUT
SKIP
SKIP ID
SELECTOR
PLAY
SET
CLEAR
1
2
3
4
5
6
7
8
>
9
10/0
10
REPEAT
PROGRAM
CHECK
CLEAR
RANDOM
COMPACT DISC RECORDER
REMOTE CONTROL UNIT
30
,
,
or
, you can usually let the recorder number the tracks as they change on the
CD
MD
DCC
DAT
3
1
MONITOR
TIME
2
REC
3
TRACK NO.
WRITE
1
TIME
3
¢
SKIP ID
CLEAR
4
8
Recording a fade in
FADER
Recording a fade out
Note: If the recorder runs out of recording space on the disc before the source
has finished, it will automatically record a fade out and stop recording.
Press TRACK NO. AUTO/MANUAL to switch from
automatic and manual numbering.
The red
indicator lights to remind you that manual
MANUAL WRITE
numbering is switched on.
Press
.
/
TRACK NO
AUTO
MANUAL
numbering. The
AUTO TRACK
You can switch between auto and manual track numbering either
before starting to record, or during recording itself.
Start recording.
You can use manual numbering in any record mode, but it is best
suited to manual digital-input or analog-input recording (see pages
23 and 25 for more on these recording modes).
Press TRACK NO. WRITE (MANUAL) at any point
you want a new track to start.
tracks must be at least four seconds long —the recorder won't let
CD
you start a new track less than four seconds into the current track.
With the source playing, press FADER during
record-pause mode to fade in.
Recording starts with a gradual fade in.
Press FADER during recording to fade out.
After recording about five second fade out, the recorder goes into record-
pause mode. This happens in either normal or synchro record mode.
You can also just press 7 (stop) if you don't need a fade out.
If you record a fade out during all-track sync mode, the synchro mode is
canceled after the fade out (see pages 20–22 for more on synchro recording).
again to switch back to automatic
indicator lights in the display.