Pioneer PDR-W739 사용 설명서 - 페이지 19

{카테고리_이름} Pioneer PDR-W739에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDR-W739 44 페이지. Compact disc recorder / multi-cd changer
Pioneer PDR-W739에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

COMPACT DISC RECORDER / MULTI-CD CHANGER

3-CD CONTROL

Changing the copying speed

The recorder defaults to double (x2) speed, but if you want to

listen to the CD as it's recorded, single (x1) speed is better.

1 Press 4 1 or ¡ ¢ (CD-R side) to

switch the copying speed.

The

indicator shows the selected speed (x1 or x2).

COPY

Note: when copying or recording at double speed, you can

only monitor the recording through the analog outputs, or

through a pair of headphones. No signal is output from the

digital outputs.

◊ÛB¿ˆ≥≤/

- COMPACT DISC MULTI CHANGER

COMPACT DISC DIGITAL RECORDER

CHECK

Setting the recording level

When recording commercially produced CDs, the recording

level has already been optimized and you don't need to change

it. Boosting the level will generally result in distortion where

there are peaks in the music. If you're recording a non-

commercially produced CD that has been consistently under-

recorded, you may need to boost the level.

If you're putting together a mix CD of tracks from different discs

you might find that some tracks sound louder than others

because average volumes vary. To even this out you may want

to reduce the recording level of some tracks.

Note: when recording DTS or HDCD encoded CDs digitally,

setting the recording level at anything other than 0dB will

produce a standard audio CD without the DTS/HDCD encoding.

1 Press CHECK to start the CD playing.

The track/disc to be recorded starts playing and the

indicator starts blinking. <deleted>

2 Turn the REC LEVEL knob to adjust the

recording level.

Use the level meter to guage the best recording level (the

loudest sounds in the source should reach no higher than

the 0dB mark on the meter; the red segments in the level

meter should not light at all.

To reset the level to the same as the source, press the

knob (the

REC LEVEL

FIX

3 When you're satisfied with the recording

level, press CHECK again.

5 Copying CDs

‡ REC LEVEL

CD-R CONTROL

4 1

¡ ¢

PUSH ON-OFF

SCAN

indicator lights).