Pioneer SUPER AUDIO CD PLAYER PD-D9MK2-K 사용 설명서 - 페이지 18

{카테고리_이름} Pioneer SUPER AUDIO CD PLAYER PD-D9MK2-K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer SUPER AUDIO CD PLAYER PD-D9MK2-K 40 페이지. D9 super audio cd player

Pioneer SUPER AUDIO CD PLAYER PD-D9MK2-K 사용 설명서
06
Additional information
This player is designed to be used only with
conventional, fully circular discs. Do not use
shaped discs. Pioneer disclaims all liability
arising in connection with the use of shaped
discs.
Cleaning discs
Fingerprints and dust on discs can affect
playback performance. Clean using a soft, dry
cloth, wiping the disc lightly from the center to
the outside edge as shown below.
If necessary, use a cloth soaked in alcohol, or a
commercially available CD/DVD cleaning kit to
clean a disc more thoroughly. Never use
benzine, thinner or other cleaning agents,
including products designed for cleaning vinyl
records.
Cleaning the unit's exterior
Unplug the unit before cleaning.
Use a dry cloth to wipe off dust and dirt. If the
surfaces are very dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or
six times with water and wrung out well, then
wipe again with a dry cloth.
Do not use furniture wax or cleaners. Never use
thinners, benzine or insecticide sprays or other
chemicals on or near this unit.
If you use a chemical-impregnated cleaning
cloth, read the instructions carefully before
use. These cloths may leave smear marks on
half-mirror finish surfaces; if this happens,
finish with a dry cloth.
18
En
Cleaning the pickup lens
The player's lens should not become dirty in
normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer-authorized service center. We
do not recommend using commercially
available lens cleaners for CD players.
Condensation
Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won't damage the
player, it may temporarily impair its
performance. Leave it to adjust to the warmer
temperature for about an hour before
switching on.
Moving the player
If you need to move the player, first switch the
unit into standby (press CD PLAYER  on the
remote), then unplug the power cable. Never
lift or move the unit during playback — discs
rotate at a high speed and may be damaged.
Caution for when the unit is installed
in a rack with a glass door
Do not press the  OPEN/CLOSE on the
remote control to open the disc tray while the
glass door is closed. The door will hamper the
movement of the disc tray, and the unit could
be damaged.