Pioneer X-CM32BTD-k/-w 사용 설명서 - 페이지 8
{카테고리_이름} Pioneer X-CM32BTD-k/-w에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer X-CM32BTD-k/-w 44 페이지. Cd reveiver system
페이지 인쇄02
Part names and functions
Attaching the Non-skid pads
Apply the accessory non-skid pads to the bottom surfaces of
the speakers.
Important
• Use the speaker is usually in an upright position.
When placing speakers upright
When placing the speakers vertically upright, attach the non-
skid pads to the bottom surface of the speakers.
When placing speakers horizontally
When placing the speaker horizontally, attach the non-skid
pads to what will be the bottom surface of the speakers.
8
En
Rotating the Speaker Badge
The grill frame speaker badge can be rotated. Operate as
follows.
1
(2), and turn left (3).
The speaker badge will rotate.
The bottom surface
of the speaker
If the speaker badge does not rotate doing the above step 1,
try the following steps 2 to 3.
2
The bottom surface of
the speaker when
using it horizontally
3
in a clockwise direction using a plus driver.
• Do not rotate the screw in a counter-clockwise direction
Grasp the speaker badge (1), pull forward
3
2
Detach the speaker grill.
Rotate the screws on the backside of the grill
Backside of speaker grill
Important
as it may cause the badge to fall off.
1