Pioneer CB-A802 사용 설명서 - 페이지 8

{카테고리_이름} Pioneer CB-A802에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CB-A802 18 페이지. Rack mount kit

Pioneer CB-A802 사용 설명서
Installation Procedures
1. Disconnect all cords and cables
(including power cord) attached
to the player.
÷ To preserve data, be sure that no disc is
loaded in the player.
2. Use the accessory screws to attach
the mounting brackets to the
right and left sides of the player,
using the matching screw holes
(see accompanying illustration).
÷ When attaching the brackets, first insert the
four screws and hand tighten (so the bracket
can be moved slightly by hand). After
confirming that the brackets are mounted in
the proper positions, tighten the screws
securely.
Rack mount bracket
Accessory mounting screws
(four for each side)
Precautions during installation
÷ The rack mount brackets are identical for right
and left sides.
÷ During installation, place the player on a flat,
level, and stable table surface. When
installing the brackets, raise the player's side
some 10 mm or more above the table surface
to allow easy installation of the brackets.
Attempting to forcibly attach the brackets
without raising the player's sides may result in
damage to the player.
÷ Use only the mounting screws provided as
accessories with this product. Attempting to
use other screws may result in damage to the
player, or the player may fall.
8
CB-A802
En
Player
Mounting holes
in side of player
3. After confirming that the screws
installed in step 2 are tightened
securely, install the player on the
rack.
Player
Screws (#)
Rack mount
brackets
[Caution]
÷ Do not attempt installation before confirming that the
rack is strong enough to sustain the weight of the
player and is proper for the installation location.
÷ Screws indicated with a star (#) in the illustration
are not provided for attaching the rack mount
brackets to the rack itself. Select mounting screws
that are appropriate in length and strength for the
weight of the unit, installation conditions, and the
rack specifications. The position of the rack mount
bracket holes are shown in this document's
"Dimensional Diagram".
Also, in order to assure safe and secure mounting
of the player in the rack, be sure to place screws in
all four holes provided in each rack mount bracket.
÷ Installation to the rack should always be performed
by two or more persons.
÷ During installation, take care not to pinch your
fingers or other objects between rack mount
brackets and the rack sides.
4. Confirm that the screws inserted in
step 3 are tightened securely before
completing the installation.
÷ After installation, if the accessory rack mount
bracket screws or the rack mounting screws
become loose, vibration caused by the player's
disc rotation or produced by other components
may cause distortion in sound reproduction, as
well as leading to the danger of the player's
accidental falling. Be sure to confirm that all
screws are tightened securely.
Rack (EIA
compliant)
Rack mount
installation
screw holes
Screws (#)