Pioneer DVD-A02 사용 설명서 - 페이지 7

{카테고리_이름} Pioneer DVD-A02에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DVD-A02 37 페이지. Dvd-rom drive unit
Pioneer DVD-A02에 대해서도 마찬가지입니다: 서비스 매뉴얼 (31 페이지)

페이지 인쇄

A HARDWARE TOUR

Illustrations are provided in this chapter as a visual introduction to the Drive.

Please Familiarize yourself with these illustrations and refer to them when necessary

to complete the installation and operation of the unit.

FRONT VIEW

PHONES

1 Disc loading slot

Insert the DVD-ROM or CD-ROM with the label facing up.

Precautions on playing 8 cm/3-inch Discs

When playing 8 cm/3-inch discs, always use the adapter for 8 cm/3-inch discs. Before

loading the disc into the DVD-ROM drive unit, be sure to check that it is secured properly

by the catches of the adapter. If discs have been inserted without the adapter by mistake,

remove the disc immediately by pressing the eject button. If the disc does not come

out with one press, press another time.

Use 8 cm/3-inch disc adapters labeled with the

product). Do not use adapters which cause the disc to idle, nor adapters which are

bent or curved.

2 Eject (0) button

This button is used to eject the disc.

3 BUSY indicator

Flashes during data access.

4 DVD indicator

Lights when a DVD is loaded.

5 Volume Control (headphone level)

This is used to adjust the volume level of the headphone jack.

6 Headphone jack (PHONES)

This is a stereo minijack for headphones.

7 Hole for forced ejection

When the eject button has lost its function, insert an accessory pin for emergency

ejection into this hole and push to eject the disc.

WARNING:

÷ Before executing this operation, be sure to switch off the power supply of the

computer and confirm that the disc loading is stopped. It takes approx. 30 seconds

to stop loading a disc after switching off the power supply.

÷ Always use the pin provided (Do not use other objects).

DVD-ROM DRIVE

DVD

BUSY

mark (recommended standard

Fig. 1