Pioneer DVD-V7200 사용 설명서 - 페이지 17
{카테고리_이름} Pioneer DVD-V7200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DVD-V7200 46 페이지. Industrial dvd-video player
Pioneer DVD-V7200에 대해서도 마찬가지입니다: 업그레이드 정보 (1 페이지), 네트워크 매뉴얼 (24 페이지), 명령 목록 (3 페이지), 소프트웨어 설명서 (1 페이지), 뉴스레터 (1 페이지), 사양 (3 페이지)
페이지 인쇄
MARK FRAME SQUELCH SETUP
Within mark frame input commands, the picture will be
paused at mark frame (playback stop point).
When set to ON, frame search is used near the end point to
confirm the accuracy of the mark frame.
When set to OFF, although the transition from playback picture
to still picture will be smooth, some amount of frame error
between the mark frame set value and the actual still picture
may occur.
For setup, move the ‰ (pointer) to MARK FRAME SQUELCH
on the Advanced Feature menu screen using the remote
control unit's
or
control unit's
or
ON.
SQUELCH DUR SEARCH SETUP
ON:
Screen momentarily turns black during search.
OFF: Screen does not momentarily turn black during search.
For setup, move the ‰ (pointer) to SQUELCH DUR SEARCH
setup on the Advanced Feature menu screen using the
remote control unit's
remote control unit's
between ON/OFF.
SYNC OUT (DURING SQ) SETUP
This function sets whether a picture sync signal is output
with video output when the player is stopped.
OFF: Video is always output and there is no loss of sync
signal.
ON:
There is loss of picture output at times other than
playback or when menu screens are displayed.
For setup, move the ‰ (pointer) to SYNC OUT (DURING SQ)
on the Advanced Feature menu screen using the remote
control unit's
or
control unit's
or
OFF.
ADVANCED FEATURE MENU DETAILED INFORMATION
button and press the remote
button to select between OFF/
or
button and press the
or
button to select
button and press the remote
button to select between ON/
STACK MODE OSD SETUP
This function controls ON/OFF of OSD displays during stack
playback.
ON:
STACK OSD is displayed on the screen when search
is used during stack playback.
OFF: STACK OSD is not displayed.
For setup, move the ‰ (pointer) to STACK MODE OSD on
the Advanced feature menu screen using the remote control
unit's
or
button and press the remote control
unit's
or
button to select between ON/OFF.
17
<VRB1208>