Pioneer V8000 - DVD Professional Player 제품 정보 게시판

{카테고리_이름} Pioneer V8000 - DVD Professional Player에 대한 제품 정보 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer V8000 - DVD Professional Player 4 페이지. Correction for external field lock synchronization

페이지 인쇄

RODUCT

NFORMATION

DVD-V8000 – Correction for External Field Lock Synchronization

VERVIEW

In specific cases, customers with multiple DVD-V8000s may need to synchronize playback between

two or more players. This industrial DVD player model provides analog and digital output syncing.

The DVD-V8000 employs a special audio video processing circuit to produce the best possible output

signals. This circuit allows the user to perform a number of output adjustments to both the audio and

video signals. When external sync is enabled, the output video signal for an interlaced analog video

signal is locked to field two instead of the normal field one lock. To correct the field lock issue, update

the industrial DVD player's firmware to version 1.12. This firmware offers two sync modes per video

type, two for NTSC and two for PAL.

If you need to synchronize playback for your DVD-V8000 installation(s), please contact Pioneer and

request firmware update version 1.12 which corrects the external sync code. This update also adds

functionality to your DVD-V8000. Firmware version 1.12 contains the following changes:

Corrects External Sync code (this option is in the Advanced Features menu)

Protects against lock-ups when using specific RS-232C commands

Adds the ability to backup and load the weekly timer setting using a USB Memory device

The industrial DVD player DVD-V8000 with firmware version 1.12 offers two external sync modes for

both NTSC and PAL signals.

NTSC Mode 1 offers full video output adjustments plus DVI and progressive video out

NTSC Mode 2 provides external sync Interlaced video locking to field 1 with DVI and

Component Video Out fixed at Interlaced (NTSC Mode 2 is compatible with the DVD-V7400

external sync operation)

PAL Mode 1 has DVI-D and Advanced Video Adjustments enabled and Component Video

Out, both Interlaced and progressive, as selectable

PAL Mode 2 performs in the same manner as the DVD-V7400 with Advanced Video

Adjustments disabled, DVI-D disabled, and Component Video Out fixed at Interlaced (PAL

Mode 2 is compatible with the DVD-V7400 external sync operation)

Note: When locking to external sync on an updated player, NTSC Mode 2 and PAL Mode

2 disable the DVI output, analog progressive output, and all audio video playback

adjustments

for color synchronization. The player only supports vertical timing for field

synchronization.

Created by HBG-A Product Development & Technical Support

Pioneer Electronics (USA), Inc.

ULLETIN

However, this firmware does NOT add support of sub-carrier timing

(800) 872-4159

PIB # 152701

Page 1 of 4

Released: 23 Oct 2006