Pioneer CP-VSL3 설치 및 사용 지침 - 페이지 6

{카테고리_이름} Pioneer CP-VSL3에 대한 설치 및 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CP-VSL3 20 페이지. Hung on wall unit

페이지 인쇄

This unit is not provided with screws

necessary for wall mounting. Please

provide the appropriate screws based on

the material and strength of the wall

where the unit is to be mounted.

This unit is designed for exclusive use with Pioneer Speaker

System S-VSL3.

Do not use with any speaker system other than

the one for which the unit was designed. Do not

attempt to modify the structure or use for other

PROHIBITED

than the unit's designed purposes.

Improper or unsafe mounting may allow

speakers to fall, leading to dangerous accidents.

CAUTION

Installation Location

The location selected for mounting should be

flat, and strong enough to fully able to support

CAUTION

the weight of fixture and speaker.

Depending on the kind of wall construction,

some types of walls may not be strong enough to

safely support the unit and speaker; consult a

professional installation technician for advice.

When using other kinds of installation, be sure to

read the speaker system S-VSL3's Operating

Instructions fully and abide by all instructions there.

Never install the unit at a slanting angle,

horizontally, or upside down. Also, never attach

PROHIBITED

the unit to a ceiling.

Do not install in locations where people may

easily hang from or lean against the unit.

Do not install outdoors, in hot spring baths, or in

locations near the ocean.

Do not install in locations where the unit may be

exposed to vibration or impact.

Assembly and Installation

Follow the designated assembly steps properly,

and fasten the assembly screws securely in the

designated locations. Failure to follow these

CAUTION

assembly instructions correctly may cause

damage to the unit or lead to dangerous

accidents after installation.

If you discover any abnormalities or irregularities

during assembly or installation, contact your

professional installation technician for repairs

as soon as possible.

Due to varying environmental conditions, this

fixture may be subject to aging and lose adequate

supporting strength after an extended period of

usage. We highly recommend that each five years

of use (on average), you consult your professional

installation technician and have the fixture

inspected to assure continuing safety.

Confirm Parts

Please confirm that all parts are present before assembling.

Note

• Screws required for wall installations are not furnished and

must be provided by the user.

• A Phillips screwdriver is required for assembly.

• Wall plates (body) x2

• Upper plates x2

• Safety strap x2

• Bushings x4

• Allen (hex)

wrench #5

(for base)

• Installation and Usage Instructions <SRD1265>

Numbers in angle brackets <> are parts serial numbers.

• Terminal cover x2

• Screws x6

• Allen (hex)

wrench #3

(for upper part)