Pioneer PDP-S11 사용 설명서 - 페이지 3

{카테고리_이름} Pioneer PDP-S11에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDP-S11 21 페이지.

페이지 인쇄

INSTALLATION ON THE

PLASMA DISPLAY

Perform installation according to the following steps 1 to 7.

NOTE:

Before attaching the speaker, please attach the PDK-

TS03 table top stand (or another Pioneer plasma

display stand) to the plasma display unit.

Attach the speaker mounting fittings to

the rear of the plasma display.

Using the supplied hexagon socket head screws, fix

the speaker mounting fittings to the left and right

sides of the plasma display. (Use the supplied hex

wrench to tighten the screws.

• Turn clockwise to tighten.

• Align the lugs on the speaker mounting fittings

with the holes in the plasma display unit.

Connect the supplied speaker cords to

the back of the plasma display.

(Please also see the installation instructions of the

plasma display.)

Attach the two supplied wire clamps to

the rear of the speakers, as shown.

• The clamp opening should be pointing downward.

Connect the other end of the speaker

cords (see step 2) to the speakers.

See the following page for more detailed information

on connecting speaker cords.

This illustration

shows the PDK-

TS03 table top

stand.

Mount the speakers onto the speaker

mounting fittings.

To avoid damaging the stand, cover it with the

protective wrapping that covered the speaker.

Protective wrapping (the PDK-TS03 table top stand

only)

Carefully, mount the speaker onto the mounting

fittings.

Fix the speaker to the mounting fittings.

Use the supplied flat countersunk-head screws to fix

both right and left sides of the speaker to the

mounting fittings as shown below.

• Turn clockwise to tighten.

NOTE:

Do not use the screw hole located on the

underside of the mounting fittings to fix the

speaker.

English

This illustration

shows the PDK-TS03

table top stand.

This illustration shows

the PDK-TS03 table

top stand.