Pioneer PDP-S44-LR 사용 설명서 - 페이지 9

{카테고리_이름} Pioneer PDP-S44-LR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDP-S44-LR 32 페이지. Operating instructions
Pioneer PDP-S44-LR에 대해서도 마찬가지입니다: 사용 설명서 (33 페이지)

페이지 인쇄

③ Catch the hooks on the top of the speakers to the partially

tightened screws, then line up the holes in the hooks on

the bottom of the speakers with the screw holes on the

bottom of the display and partially tighten the included

screws (M8) in them.

Screws (M8)

WARNING

Connecting the cords

Turn off the power of all connected units before connecting the cords.

Connect the display's SPEAKER R and L terminals with the

speakers' terminals using the included connection cords.

After connecting the speaker terminals

with the connection cords, confirm

that the cords are connected at the

terminal securely by tugging on the

cords. A loose connection may cause

sound dropouts or noise.

●

When the speakers are installed on the display, do not move the unit by lifting up the speakers.

The display could fall and cause injury.

④ Fully tighten the four partially tightened screws.

*Push the speaker against the display while driving

the screw.

There is polarity　

connection cord.

Connect each conductor to the correct terminal.

While holding the button of each speaker

t e r m i n a l , i n s e r t a c o n d u c t o r o f t h e

connection cord.

Cord Clamper

Peel off the protective tape from the back of the clamper,

then mount the clamper in the desired position and clamp

the cords together.

E-3

with the conductor of each

Black

Red