Pioneer S-FCRW240W-S 운영 매뉴얼 - 페이지 6

{카테고리_이름} Pioneer S-FCRW240W-S에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer S-FCRW240W-S 8 페이지. Home theater loudspeaker system

페이지 인쇄

www.pioneerelectronics.com

TROUBLESHOOTING

FRONT / CENTER SPEAKERS

SYMPTOM

1. No sound

2. Sound is distorted

3. Speakers stop producing sound

suddenly

POWERED SUBWOOFER

SYMPTOM

1. No power is being supplied

(Indicator does not light up when

power switch is turned on.)

2. No sound

(Power indicator is ON.)

3. Sound is distorted.

4. Howling noise occurs.

PROBABLE CAUSE

• Bad speaker wire or connection

• Receiver is off

• Volume control is at zero

• Extreme signal condition

• Extreme signal condition for extended

period of time

PROBABLE CAUSE

• Power supply plug is not correctly

inserted.

• No power at wall outlet.

• Connection of speaker or accessory RCA

cord is wrong or disconnected.

• LEVEL knob is set to MIN.

• Subwoofer level is too large.

• Input level is too large.

• Power supply to amplifier or speaker

switch is turned off.

• Subwoofer level is set too high.

REMEDY

• Connect correctly or replace wire

• Turn on receiver

• Slowly turn up volume

• Turn down the amplifier's output level

(volume, bass control, bass boost) to

lower the level.

• Shut off the system for 5-10 minutes and

allow the protection device to reset.

REMEDY

• Insert plug securely.

• Turn other power switches on to make

power available.

• Check again and connect correctly.

• Turn clockwise slowly.

• Turn the LEVEL knob counter-clockwise

to lower the level.

• Turn the amplifier's output level (volume,

bass control, bass boost) to lower the

level.

• Connect power supply to amplifier and

turn speaker switch on.

• Place the subwoofer a good distance from

speaker. Turn the LEVEL knob counter-

clockwise to lower volume.